Recommended Adjustable 2 Ball Coupler To Replace A Lunette Ring On A Trailer
Question:
I have a trailer that has a vertical channel mount with a pindle ring like your part Item # 358LOOP. I need to convert it to a 2 ball hitch. Do you have what I need?
asked by: William C
Expert Reply:
If you are replacing your current lunette ring, you will need to check on 2 measurements to make sure a coupler will fit your channel. First will be the width and second will be the hole spacing.
As an example, the Demco Trailer Coupler - Adjustable Channel Mount # DM12688-95 will fit a 3" wide channel and will have 2" hole spacing when measured center to center. This is also designed for the use with a 2" ball and will have a 10,000 max capacity. Odds are this will match what you have as it is a very common size, but I definitely recommend double checking, just to make sure.
(click to enlarge)
Products Referenced in This Question
Demco Trailer Coupler - Adjustable Channel Mount - eZ-Latch - Zinc - 2" Ball - 10,000 lbs
- Adjustable Trailer Coupler
- Coupler Only
- 10000 lbs GTW
- 2 Inch Ball Coupler
- Trigger Latch
- Demco
more information >
Product Page this Question was Asked From
Curt Pintle Hook - Bolt On - 20,000 lbs
- Pintle Hitch
- Pintle Hook - Standard
- 20000 lbs GTW
- Bumper Mount
- Plate Mount
- No Shank
- CURT
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Will Curt Pintle Hook Install on Tow Ready Pintle Hook Mount
- Recommendation For Pintle Hitch To Work With 3-Inch Lunette Ring On 10-Ton Trailer
- Recommended 3 Inch Lunette Ring Over 2-1/2 Inch Alternative
- Mounting Hole Spacing on B&W Pintle Hook Mounting Plate BWPMHD14005
- Can Buyers Products 3 Position Pintle Hook Mount be Used in Rise Position
- Will 20K Pintle Hook C48210 Bolt to B&W Pintle Hook Mounting Plate PMHD14005
- Can Curt Pintle Hook Mounting Plate be Used in the Rise Position
- Can A Lunette Ring Be Used with the B&W Pintle Hook Mounting Plate
- Pintle Hook Recommendation to Fit B&W Pintle Hook Mounting Plate # BWPMHD14002
- Determining Towing Capacity when Using B and W Pintle Mounting Plate # BWPMHD14005
- Can a Swivel Type Pintle Hook Be Used with 2 Hitch
- Can the B&W Pintle Hook Mounting Plate # BWPMHD14005 be Used in Rise and Drop Configuration
- Does B and W Pintle Plate # BWPMHD14004 Fit Pintle Hook # C48210
- Is There A Pintle Adapter Available For A B&W Tow And Stow Ball Mount In A 3 Hitch
- Recommended Pintle Hook And Mount With 8 - 10 Inch Rise
- Higher Rated 2 Inch Pintle Hook Mounting Plate
- Mounting Hole Dimensions For The Pintle Hook Mounting Plate Adapter TLM9002
- Buyers Products 2 Pintle Hook Mount # 337PM90 Come with Mounting Hardware
- Can the B&W Pintle Hook Mounting Plate be Used in Both the Rise and Drop Positions
- Pintle Hook Mount and Pintle Hook Recommendation for Pulling a Military Trailer With a Chevy Tahoe
- Pintle Hitch Plate For 1997 Ford L8000 Dump Truck
- Does Reese Titan Pintle Hook Mounting Plate part # RP45294 Fit Curt Hitch
- Length From Pin Hole To Face of Curt Pintle Hook Mounting Plate C48348
- Will a Pintle Hitch Fit Weld-On Nose Plate 337TNP716625750
- How Much Does The Gen-Y 325-GH-1201 Weigh Before A Pintle Hooks Is Installed?
- What is Needed for a Pintle Hook for a Ford F-250 Super Duty to Tow a Trailer Level
- Can Curt Pintle Hook Work With Pro Series Adjustable Pintle Hook Mounting Plate
- Can B&W Pintle Mount and Tow Ready Pintle Hook Give 4 inches of Drop
- Pintle Hook for a 2-1/2 Inch Trailer Hitch with a Long Shank