Help for Installing a Tekonsha Wiring Harness in a 2022 Honda Pilot

Question

Question:

I picked up the Tekonsha wiring for my 2022 Honda Pilot but could use some clarification on the installation anything you can provide would be appreciated.

asked by: TJ

0

Expert Reply:

Installing your Tekonsha T-One Vehicle Wiring Harness # 118760 may seem difficult but it is not as complicated as you would think. The # 118760 is going to be our easiest wiring harness to install while also being one of our most reliable.

This is an easy plug and play harness, you will need to plug the harness into a tow plug that will be in an access panel in the rear storage compartment. You can open the compartment with a flathead screwdriver or Trim Pad Remover # ALL648544 (using the Trim Pad Remover will help you not break the fasteners). Once the harness is plugged in and you have attached the ground wire, you simply need to install a few fuses that are included with the harnesses. I have included a picture from the installation instructions that show you where the fuses go. I have also included a video that will walk you through the installation of the wiring harness.

expert reply by: Scott S

0