2021 Ford Ranger Roof Rack Recommendation

Question

Question:

What exactly should I order for my new 2021 Roush Ranger, I want the black aluminum setup complete. Is there a kit I can order. I Just want to make sure it looks exactly like the video. I think it will fit the theme of the Roush setup. Thanks so much.

asked by: Pat B

1

Helpful Expert Reply:

It looks like you're interested in the Thule WingBar Evo Roof rack in black. Because of the huge number of possible combinations, we don't kit the parts but I can tell you exactly what you'll need to provide a rack for your 2021 Ford Ranger. You'll need the following parts:

• Thule 53 Inch WingBar Evo Crossbars in black, part # TH711420
• Thule Evo Clamp roof rack feet, part # TH710501
• Vehicle Specific fit kit, part # TH145063

The rack will look exactly as shown in the linked video.

expert reply by: Mike L

1

Answer 1

I have a roof rack option for you, but no, the Yakima #Y93TR will not fit your 2019 Ford Ranger. Instead for a confirmed fit Roof Rack I'd go with the option from Thule which uses the following parts: Crossbars #TH711400 Feet #TH710501 Fit Kit…

view full answer...

Answer 2

The Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading #TH898 requires 4-8 inches of crossbar overhang past the towers to ensure there is no vehicle contact. I recommend using this same measurement as a guide for use on…

view full answer...

Answer 3

Due to the shape of most kayaks tapering in width on the front and back and the fact that where the Thule Hullavator part #TH898 grabs the kayak is typically at a much narrower width than the widest point of the kayak Thule states that this carrier…

view full answer...

Answer 4

Yes. The Thule Hullavator Pro #TH898 will fit on Yakima HD Crossbars like the #Y01157 mounted either in the channels or using the clamp on mounts. Since the Hullavator Pro does not come with locks included you may want to consider adding those with…

view full answer...

Answer 5

The Thule Hullavator part #TH898 was designed to fit the top channels of crossbars like what your TracRac SR ladder rack has. As long as you recieved a complete rack you should have the needed hardware to install it into the top channels. Are you…

view full answer...

Answer 6

Yes, the Thule Hullavator Pro Kayak Carrier and Lift Assist part #TH898 will work with a Thule TracRac TracONE Truck Bed Ladder Rack like part #TH27000XT. That said, you'd need to use the channels inside the crossbars for mounting, remove the…

view full answer...

Answer 7

Hey Kathy, thanks for reaching out! I recommend using the 58" Malone AirFlow2 Roof Rack #MAL84AR for your 2022 Subaru Forester Wilderness as it will have enough overhang to comfortably fit and use both a cargo box and an awning. If you don't…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Michael, I'm very happy that the safety cables held, that's really nice to hear and I'm glad there was no serious damage. As for the Curt Custom Base Plate Kit #C64ER, they don't have replacement brackets and bolts, so you would…

view full answer...

Answer 10

In order to charge the battery on a 2019 Ford Ranger while in tow I recommend the Roadmaster Battery Charge Line Kit for Towed Vehicles part #RM-156-25. The connection can then be bridged with the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit part…

view full answer...

2021 Ford Ranger Roof Rack Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching