Recommended Small Bumper Mounted Cargo Carrier

Question

Question:

Is there a smaller version of this cargo carrier? The design looks great. It is just to big for my application.

asked by: Gail D

0

Expert Reply:

The 24x40 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500lbs # e99050 is the smallest version of our cargo carriers but we do offer the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200lbs # MNT54FR which is 24" x 24" and utilizes the same mounting design.

expert reply by: Kevin C

0

Answer 1

We have the 24x84 etrailer Cargo Carrier for RV Bumper, #e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" #e83YR, a 60" wide version under part, #e99049 and a 40"…

view full answer...

Answer 2

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

view full answer...

Answer 3

There is not an option to get only the cargo carrier without the brackets for the 24x40 etrailer Cargo Carrier for RV Bumper #e99050. I have added a link below to a video review for you to check out as well.

view full answer...

Answer 4

Thanks for the pictures! Starting with the spare tire carrier I recommend the using the Brophy Rigid Mount Spare Tire Carrier #BR56VR which will mount to your 4" or 4-1/2" square bumper next to the #e99050 you have as shown in the included…

view full answer...

Answer 5

For your 2021 KZ Connect I recommend using one of our etrailer RV Cargo Carriers. They are available in different sizes for the size of the gear you wish to carry. Do be sure to contact your KZ dealer to determine how much weight your rear bumper can…

view full answer...

Answer 6

It sounds like you're looking for an RV cargo carrier for an 8" bumper that's 24x36" with a 500-lb capacity. I have a possible solution for you. First, though, the only bumper-mounted cargo carrier we carry that closely matches the…

view full answer...

Answer 7

I can definitely help you out with a cargo bag to use with the nifty 24 x 40 etrailer Cargo Carrier for RV Bumper #e99050. The best option for this is going to be the etrailer Cargo Bag with Mounting Straps #e98990. There are a number of reasons why…

view full answer...

Answer 8

I recommend using either a 24x40 etrailer Cargo Carrier for RV Bumper #e99050 or 24x60 etrailer Cargo Carrier for RV Bumper #e99049 and moving the spare tire to either side of the bumper. You can see how the 40" wide carrier is installed with a…

view full answer...

Answer 9

It sounds like you are looking for a enclosed carrier like the GearDeck 17 #H00604 as we do not have a cover for the 24x40 etrailer Cargo Carrier #e99050. The GearDeck carrier will allow you to protect your generator and other gear from the rain and…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Small Bumper Mounted Cargo Carrier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching