Does the Fan of the Ventline Ventadome Trailer Roof Vent Pull Air Out of a Trailer

Question

Question:

Please tell me if this vent fan blows air out of the trailer OR blows air into the trailer, then which one makes more sense and why. We live in a very hot desert climate and will be transporting candy/snack cakes.

asked by: Jerôme M

0

Expert Reply:

The Ventline Ventadome Trailer Roof Vent # V2094SP-30 that you referenced is an exhaust fan, what that means is that it pulls air out of the the trailer.

The reason for this is that hot air rises, so when you pull out the air at the top of the trailer you will be removing the warmest air and replacing it with cooler air.

I am not sure if this would be sufficient to keep your candy from melting while they are being transported through a hot desert climate. You might have to pack them in a cooler with ice packs to prevent that.

expert reply by: Jameson C

0

Answer 1

I went out to the warehouse and the thickness of the rough opening in the roof for installing this vent can be from 1-7/8 inches to 3 inches.

view full answer...

Answer 2

It sounds like you are talking about the ceiling garnish. I have included a link to the ones that we carry to the right. But they are all 14-1/4 inches square. This is the measurement of the part that fits in the opening though, not the overall width…

view full answer...

Answer 3

The interior trim piece on the Ventline Trailer Roof Vent, part #V2092SP-28, fits roofs 1-7/8 inches to 3 inches thick. This unit should work just fine for you. I have included a link to a video review of the vent for you.

view full answer...

Answer 4

We offer a range of complete trailer vent assemblies, such as the Ventline #V2092SP-28 that you referenced, as well as replacement vent covers in various materials and colors. The Jayco website does not provide specifics as to the vent supplied with…

view full answer...

Answer 5

I went out to the warehouse and pulled a MaxxAir Vent 64643 and a Ventline Ventadome Trailer Roof Vent, #V2092SP-28, and tested them together. The MaxxAir fits over the Ventline vent so the two are compatible. The MaxxAir cover was designed to fit…

view full answer...

Answer 6

Yes, there is Joe! We've got two options for a slide topper that fits a 82-1/2" slide out. They are the Solera RV Slide-Out Awning item #LCV000165062 in black or white item #LCV000163287. Please note you'll want to make sure you have…

view full answer...

Answer 7

Joe, I was able to track down a diagram and find out that the Telesteps Telescopic A-Frame Ladder #TE37FR is 15.4" wide all the way up and down until it reaches the base where it extends to 30.1".

view full answer...

Answer 8

For a 3,000 watt inverter you'll need a 300 amp hour lithium battery like the Go Power Sun Cycle Advanced Lithium RV Battery item #GP26QR.

view full answer...

Answer 9

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 10

Hey Dennis, The bracket the mounts to the trailer wall would need to be installed at the factory and unfortunately isn't an option aftermarket. These are relatively new so I'm assuming after enough people complain to Lippert they'll start…

view full answer...

Does the Fan of the Ventline Ventadome Trailer Roof Vent Pull Air Out of a Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching