Do Dexter Axles Rated For 3,500 Lbs Have 3" Diameter Tubes
Question:
Does Dexter make a 3500 # axle with 3 inch diameter tube?
asked by: Dennis O
1
Helpful Expert Reply:
The Dexter axles rated for 3,500 lbs have a 2-3/8" diameter. If you want a Dexter axle with a diameter of 3", you will need to go with an axle rated for 7,000 lbs. Something like this Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs, part # 8327834, has a 3" diameter tube.
I have included a product description link, a video review link, and a weblink to our Dexter axles rated for 7,000 lbs below.
helpful expert reply by: Mark S
1
Products Referenced in This Question
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 7000 lbs
- Spindles Only
- 80 Inch
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Trailer Axle For 5,200LB Axle Using 22834 Trailer Hub
- Correct Replacement Hub For Jet Ski Trailer With BT150 Hub
- Replacement Brake Assemblies and Hub Drums for 3500 lb Axle
- Can Hub and Drums On 1990 Four Winns Boat Trailer Be Reused When Replacing Brakes?
- How to Pick Out 2011 Forest River Wildwood Replacement Axles
- How to Find Weight Capacity on 2-1/4 x 3-Inch Boat Trailer Axle
- How To Determine Weight Capacity of Trailer Torsion Axle
- Recommended Trailer Axle Replacement for 3,500 lb Axle on Custom Width Trailer
- How to Determine Dexter Axle Weight Capacity
- Is a Axle Stamped with D80 an Dexter 8k Rated Axle
- Troubleshooting a Torsion Axle Trailer that is Rubbing the Fenders
- How are Trailer Axles Typically Identified
- Will Exceeding Axle Capacity Bend an Axle
- Tips for How to Identify a Trailer Axle
- Trailer Axle Weight Rating for 2 Inch Square Axle
- How Can I Identify an Axle Without a Sticker?
- Replacement Leaf Springs for a 2004 Keystone Cougar 301 BHS
- Dexter vs Lippert vs AL-Ko Trailer Axles
- What is the Weight Capacity of a Dexter SLR P16 Axle
- Replacing Bearing Drums and Brakes on an Older Axle
- Idler Hub for Lippert 7k Axle that Has 6-Bolt Pattern
- How To Determine Axle Capacity for a Fifth Wheel Trailer
- Where to Measure a Trailer Spindle to Pick Out Replacement Trailer Hubs
- How To Determine Axle Capacity of Trailer with 4 Lug Hubs with Brakes
- Can a Spindle be Replaced on a 7,000 Pound Trailer Axle
- Are Two 1,750 Pound Torsion Axles Rated for a Combined 3,500 Pounds or Just 1,750 Pounds
- Determining Diameter of Axle on 2007 Jayco Octane Toy Hauler