Correct Replacement Urethane Bushing for Roadmaster 555 Sterling Tow Bar

Question

Question:

I have an older sterling tow bar. Not sure what model but serial number is 012459. Will this bushing fit? Thanks,

asked by: Paul E

0

Expert Reply:

I confirmed with Roadmaster that the Replacement Urethane Bushing for Roadmaster Sterling Tow Bars part # RM-200680-00 is correct for your older Roadmaster Sterling Tow Bar with serial number 012459.

expert reply by: Conner L

0

Answer 1

Usually if a tow bar inner arm gets stuck it's because it is bent. Sometimes it is due to dirt/corrosion build up which you can clean the inner arm with Roadmaster Voom part #RM-9911 like what you see in the attached rebuild video. If you remove…

view full answer...

Answer 2

We do have some replacement parts that will work with your older Sterling tow bar. But to ensure they fit I would need to know the serial number of your tow bar. For replacement parts we have the following: Repair kit #RM-910003-30 Replacement…

view full answer...

Answer 3

The Complete Repair Kit #RM-910003-30 that you referenced comes with everything in the picture I attached. I attached pictures of the installation process for you to check out as well.

view full answer...

Answer 4

What you would need is the part #RM910003-32 for the bolts, the part #RM-200029-10 for the bushing and then for the yoke part #RM910575 and you'd be set. There isn't an entire kit that covers all the parts you need but with these three part…

view full answer...

Answer 5

You've been doing some great research! I reached out to my contact at Roadmaster who said that the 2 kits you need to service your older Roadmaster Sterling tow bar are parts #RM-910003-40 and #RM-910003-30 like you referenced. These come with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Correct Replacement Urethane Bushing for Roadmaster 555 Sterling Tow Bar

Product Page this Question was Asked From

Continue Researching