Thickness of Hangers in the Single-Axle Trailer Hanger Kit for Double-Eye Springs
Question:
I see all the measurements but the thickness of the wall. What are the wall thicknesses of your hangers?
asked by: Austin
0
Expert Reply:
The Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS4 uses 3/16" thick hangers.
expert reply by: Conner L
0
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Similar Expert Q&A Pages
- What is Width of Hangers in Single-Axle Trailer Hanger Kit APS4
- Tall Single Axle Hanger Kit and Spacing Required Between Hangers
- Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
- How is the Height Measured on Trailer Suspension Hanger 93003-3X
- Can Over Under Kit Fit 2 inch Square Axle on Trailer
- Where To Place the Leaf Spring Hangers On a Single Axle Trailer
- Leaf Spring Recommendation for 1996 Calkins Boat Trailer
- What Torque Should My Suspension Components Be Tightened To?
- Best Options to Lift a Single Axle Trailer
- Hanger Spacing Dimension for the Leaf Spring SP-210275 on a Trailer
- How to Raise the Height of a Boat Trailer to Avoid Scraping on Inclines
- Can Trailer With 1-3/4 Inch, 2,000 lb Slipper Springs Change to Double Eye Springs
- Boat Trailer Suspension is Making a Loud Popping Noise
- Determining Correct Hanger Spacing For Installing Single-Axle Hanger Kit APS4 W/ 24-7/8" Leaf Spring
- Will Spline Length of Bolts from Single Axle Hanger Kit APS4 Prevent Leaf Spring Movement
- Hanger Distance Recommendation for Trailer Leaf Spring that Measures 25-1/4 inches
- How Far Apart Should Hangers be Mounted for 27 Inch Leaf Springs
- How To Convert Slipper Springs to Double Eye Springs on a 2007 Carnai TFS Trailer
- Shackle Strap Length For Single-Axle Trailer Hanger Kit APS4
- How to Raise a Boat Trailer to Gain Ground Clearance
- Availability of Trailer Suspension Shackle Bolts in 4-inch Length and 9/16-Inch Diameter
- Hanger Placement with 3,500 lb Axle with Hanger Kit part # APS4 On Trailer with Axles Under Springs
- Can I Use a 2" Hanger for a 1-3/4" Wide Leaf Spring
- How to Mount Redline Single-Axle Trailer Hanger Kit Part # APS4 To Trailer Frame
- How To Convert Trailer With Slipper Springs To Double Eye Springs
- Replacement 61 Inch Axle With 2 Inch Diameter
- How To Determine Correct Hanger Spacing with Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Suspension Needed for a 1973 Trillium Travel Trailer