Solera Awning Idler Head in Black  

Thank you for the picture, I can see the pin is bent rendering your solera head shaft inoperable even though you tried bending it back. Unfortunately, the only fix would be to completely replace the head as this part isn't currently available…

To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.

From the information I could find it looks like the awning you have on your 2017 Grand Design came from Dometic. If this is the case then we unfortunately don't have any replacement head cover parts. If you are wanting to replace your awning with…

The idler head is the head opposite of the head with the motor on your Solera RV awning setup. The part #LC672052 is the correct replacement for that.

Yes, the Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR will fit on the idler head as well as the drive head.

I see that you are asking about the Replacement Mounting Hardware for Lippert Solera Slide Topper kit #LC701665. You can purchase the Replacement Slide-Out Hex Bar Extension Bracket #LC2724412 and Replacement Awning Extension Rod #LC3452072 that come…

The Replacement Mounting Hardware Kit for Lippert Solera 13-1/2' Slide Topper #LC701665 is the mounting hardware kit for a 13-1/2' Solera Slide Out Topper like the # LCV000168109, so it will only contain the parts you need to mount the topper…

The Replacement Mounting Hardware for Lippert Solera Slide Topper - Black #LC701665 will help you get the parts you are missing.

There isn't a left or right hand version of the Replacement Idler Head and Roll Tube part #LC87FR that you referenced.

I have a solution for you, but my contact over at Lippert tells me that you won't be able to replace just those casings on Solera Slide-Out Topper. The parts you need are the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning -…

When looking at your Solera Slideout Topper when looking at the right side, that is the" Drive" side and the "Idler" will be on the left. It sounds like you need the drive head, so you can use the Replacement Drive Head and Roll…

The only way to get the Solera part you are looking for is to order the part number #LC87FR that you referenced as Solera does not offer it separately.