Does The Curt Replacement Shank C45917 Include The Anti-Rattle Bolt?

Question

Question:

Replacement Shank for Curt Adjustable 2-Ball Mount - 2-1/2inch Hitch - 20,000 lbs Comes with the anti rattle bolt?

asked by: Jamie

0

Expert Reply:

Though the Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 does not include the anti-rattle bolt, we do have it available separately. For this, you will need the Replacement Anti-Rattle Set Screw with Wrench for Curt Channel Style Adjustable Ball Mount # C45916.

expert reply by: Lazer S

0

Answer 1

A BulletProof hitch double ball setup will not fit in the channel of the Curt shank part #C45917 the distance between the holes and the pin diameter doesn't match. You'd need to stick with a Curt ball setup part #C45912 instead.

view full answer...

Answer 2

The Replacement Shank #C45917 is for the Curt Adjustable 2-Ball Channel Mount #C45902 which has a 5-1/4" rise/6" drop. I reached out to Curt and my contact said that at this time (July 2020) there is no replacement shank for the Curt…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does The Curt Replacement Shank C45917 Include The Anti-Rattle Bolt?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching