Thule 726 Pull Top Ski Carrier Mounting Clamps  

The Mounting Kit #TH7520970001 For The Thule Pull Top ski rack will fit your roof rack crossbars. This mounting kit was designed to fit the Wingbar Evo crossbars which are the same 3.14" x 1" as your current crossbars.

The Scissor Jack Stabilizers part #TJSCHD-24-4 that you referenced would be a great set of 4 stabilizers that would work well on your 2016 Sunseeker 3170DS. These are easy to use and have 10,000 lbs of stabilizing capacity so they would work well on…

There is a replacement bracket that will work for your Thule Flat Top Ski and Snowboard Carrier TH91725. You will need the Replacement Bottom Mounting Clamp #753-2854 which is a confirmed fit for that ski carrier. I have added a photo with dimensions…

To mount your Thule Flat Top Ski Carrier 724, you will want to use the Thule Universal Mounting Kit #7533998. These mounting feet are designed to fit most factory and aftermarket crossbars. I spoke with my contact at Thule and she confirmed that…

It looks like you have the older Thule Flat Top Ski Carrier and in which case you can purchase the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks part #7533998 to mount them onto factory aero crossbars. This kit will replace the…

I reached out to Thule and found that the difference between the Replacement 20 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier #7521241002 and the 13 mm #7521241001 is the length of that center bolt/screw. You…

That looks like an older Thule Flat Top ski rack. For a mounting hardware kit that allows it to fit newer style roof racks we have the #7533998 which will work on your 2017 Subaru Outback.

Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers. These came with universal mounting hardware as well as an…

The mounting kit you need for your ski rack on your 2017 Toyota 4Runner's factory cross bars is #TH7520970001. I confirmed with Thule that these will fit.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…