Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
Question:
I need a hub/rotor TDE 46245 MIN. THK. .850IN. Also the bearing kit and spindle
asked by: J. W
0
Expert Reply:
The Kodiak 10" Hub-and-Rotor Assembly # KHR10D matches the TDE 46245 that you currently have. The hub has a disc rotor and 5 on 4-1/2" bolt pattern.
The Hub Bearing Kit # BK2-100 contains the races, bearings and grease seal for you to be able to mount it to a spindle like the #84 Spindle for 3,500-lb Trailer Axles # TRU64FR
Customer Image
(click to enlarge)
(click to enlarge)
expert reply by: Gregory M
0
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Replacement Axle And Disc Brake Kit For A 2013 MFI Boat Trailer
- Grease For Kodiak Hub & Rotors
- Brake Upgrade Reccomendation For My UFP DB-42 Oil Bath Brakes
- Replacement 10" Hub and Rotor Assembly With Bearings for 2015 Ranger Boat Trailer
- Replacement 10" Hub-and-Rotor Assembly for 2012 ShoreLand'r Boat Trailer
- Does the Kodiak 10 Inch Hub and Rotor Assembly Come with Bearings and Seals
- Availability of Replacement Rotors and Brake Pads for Kodiak Disc Brakes
- Can Kodiak Hub # KHR10D Replace Trailer Hub TDE 46245
- Will a Kodiak Trailer Brake Rotor Fit in Place of a Tie Down Brand Rotor
- What Info Is Needed to Replace Disc Brake Setup of Boat Trailer
- Size of Spindle/Castle Nut for an 84 Spindle
- How to Determine Correct Replacement Hub for Boat Trailer
- Idler Hub To Replace TDE 46245 Hub and Rotor On Boat Trailer
- Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Recommended Spare Parts To Replace UFP Hubs With Rotors And Calipers
- Hydraulic Disc Brake Hub Bolt Pattern Options Available
- Bearings, Grease Seal, and Spindle for Kodiak Hub-And-Rotor KHR10D
- Finding replacement hubs for boat trailer that uses inner bearing L68149 and outer bearing l44649
- Replacement Hub and Spindle for 2" Square Axle with 3500-lbs Capacity
- Warranty Information for Kodiak Rotor/Hubs that Need to Be Replaced
- Replacement Rotor for Titan Disc Brake Kit
- Are Lug Nuts Included with the Kodiak 10 Hub-and-Rotor Assembly
- Determining if Trailer has 3,500 lb for Picking Out Disc Brake Kit
- Which Grease Cap And Spindle Nut Do I Need For Bearing Kit # BK2-100
- Does Grease Cap DC200L-DCRP fit Kodiak Hub/Rotor KHR10D