bing tracking image
Q & A Icon

What Replacement Hardware do I Need to Use with My Slipper Springs # # SP-161275?  

Question:

Hello Need 4 Axle U bolts 1/2 inch diameter for 3 inch axle 7 1/4 in long WITH NUTS 8 shackel bolts 3 1/2 inch long 2 3/4 inch flat length WITH NUTS 2 3/8 inch bolt the goes thru the middle of a 6 stack of springs, the one in the picture has the head broken off, needs to be 1/2 inch or so longer not sure what the head looks like couple weeks ago you sent springs, they are perfect, thanks thanks

0

Expert Reply:

For the axle U-bolts, we have two different options:

- 3" Round Trailer U-Bolts 9/16" Diameter # SP01-080
- 3" Round Trailer U-Bolts - 1/2" diameter # SP01-060

Since these bolts are so close in diameter, I recommend measuring the specific diameter of the bolts you have.

For the spring-eye bolt, the correct bolt is the Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long # 166079

As for your broken 3/8 inch bolt, we have Leaf Spring Center Tie Bolt with Nut, 3/8" x 3" # 38-3TB. If you the need the next size up, that is the Leaf Spring Center Tie Bolt with Nut, 3/8" x 4" # 38-4TB.


expert reply by:
0
Bob C
Neighbor's Current Hardware
Neighbor's Current Hardware
(click to enlarge)
Neighbor's Current Hardware
Neighbor's Current Hardware
(click to enlarge)
Neighbor's Current Hardware
Neighbor's Current Hardware
(click to enlarge)

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>