Recommended Cargo Carrier for RV Bumper 1997 Sunnybrook  

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

The bolts in the 24" Extension #e99052 are for mounting to either the 24x40 etrailer Cargo Carrier #e99050 or 24x60 etrailer Cargo Carrier #e99049. This will turn either carrier into the larger 24x64 etrailer Cargo Carrier #e83YR or 24x84…

For the 24x84 etrailer Cargo Carrier for RV Bumper, #e96ZR I recommend the Cargo Carrier Light Kit, #52014. Use 48" Car and Trailer End Loop 4-Pole, #18044 for an extension if needed.

The Swagman E-Spec 2 Bike Rack #S94FR with the separate Fat Tire Adapter Kit #S64679 fits tires up to 5 inches wide. This bike rack is designed extra sturdily so that it can be attached to your motorhomes and fifth wheelers while also having they…

Many RV bumper manufacturers construct their product with a plastic cap or a hinged door instead of endcap, allowing bumper to be used for storage; apparently you have this type. Open that end piece to examine if the seam has spot welds (short welds…

The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets - 4" to 4-1/2" #MO22FR and Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" #MO34VR. Use #MO22FR for standard bumpers and use #MO34VR…

Yes that's correct! As long as the load is evenly distributed the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets #MO22FR will accommodate up to 400lbs, and will fit bumpers that are 4" to 4-1/2". Additionally, bumper…

Yes, the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you referenced does come with bumper support brackets.

The distance between each of the mounting brackets of the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is 27-9/16 inches. The picture I attached came from the install instructions which are also linked on this page as well.

The Stromberg Carlson Bike Rack Adapter #CC-125 referenced in your question includes 4 wheel hoops that have an inside width of 2-5/16 inches, meaning they will work with wheels that are up to 2-5/16 inches wide. This adapter will allow you to…

The Stromberg Carlson Bike Rack Adapter #CC-125 that you referenced does not have a specific weight capacity, so it's really only limited by the capacity of the cargo carrier you're using it on. This means as long as your particular cargo…

I went out to the warehouse to measure the overall height of the bike rack adapters, #CC-125. The overall height from the bottom of the basket is 10-5/8 inches. I took some other measurements as well: Inside height is 10-1/8 inches Inside width is…