What Gauge Wires Are Used With The Wiring Harness In the Standard Trailer Light Kit TL29BK?
Question:
What size wire are these light kits?
asked by: Ron
0
Expert Reply:
The wiring on the 25' harness uses 20 gauge wiring for the tail light wires in the Standard Trailer Light Kit # TL29BK.
I recommend using the Heat Shrink But Connectors # DW05743-10 where you will need to splice together any wiring for a dry, corrosion resistant connection.
expert reply by:
Gregory M
0
Products Referenced in This Question
Deka Heat Shrink Butt Connector - 22-18 Gauge - Nylon Insulation - Red - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 22-18 Gauge
- Deka
more information >
Product Page this Question was Asked From
Standard Trailer Light Kit with 25' Wire Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Square
- Kit
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 5L x 4-1/2W Inch
- Red and Amber
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Does Trailer Lighting TL29BK Meet FMVSS and DOT Requirements
- Is the 4-Way of the Standard Trailer Light Kit # TL29BK Compatible with OEM 4-Ways on Vehicles
- Lighting and Conspicuity Tape Recommendation for a 36 Foot Long Trailer
- Lighting Requirements for an 8-1/2-Foot Wide Trailer for Use in California
- Attaching Peterson Trailer Tail Light Kit to Harness 118304 on 2009 Toyota Sienna
- Taillight and Wiring Kit for Redoing Lighting and Wiring of Trailer
- Troubleshooting Running Lights of Trailer Light Install Not Functioning
- How To Ground Trailer Tail Lights Without a Ground Wire To a Wooden Surface
- Troubleshooting Running Lights Not Working
- Malfunctioning Tail Lights on a Re-Wired Trailer with Tail Light Kit TL29BK
- Install Video For Standard Trailer Light Kit # TL29BK
- Replacement Trailer Wiring Kit Recommendation for German Trailer to be Used w US Spec Kia Sorento
- How to Wire the Lights in the Optronics Tail Light Kit # TL29BK
- Does the Standard Trailer Light Kit # TL29BK Have Enough Wire To Install on a 6x12 foot Trailer
- All Trailer Lights Work Except Brake Lights Using Tail Light Kit # TL29BK
- How to Wire a Ground Wire to a Trailer Light that Grounds Through Mounting Hardware
- Instructions for Using Optronics Trailer Wiring Kit # TL29BK
- Trailer Tail Light Kit with Brake Lights and Turn Signals on the Same Circuit
- What Size Bulb Does Wesbar Submersible Trailer Tail Light Lens # 102641 Use
- Availability of Trailer Taillight Kit With Submersible Taillights
- Replacement Tail Light for 1998 Jayco Travel Trailer
- How To Confirm Fit of Standard Trailer Light Kit with 25' Wire Harness
- Does the Optronics Trailer Light Kit TL29BK Include Wire Harness with 4 Pole Connector
- What Gauge Of Wire Is The 25 Foot Harness In Optronics Standard Trailer Light Kit # TL29BK?
- Troubleshooting New Wiring On Landscape Trailer Working Until Taillights Were Wired In
- Is Anything Else Needed to Install Trailer Light Kit # TL29BK
- How Do Multiple Trailer Light Assemblies Normally Attach to Running Light Circuit.
- Submersible Trailer Tail Light Kit TL29BK Does Not Need a Turn Signal Adapter
- Wiring Single Wire Clearance Lights on an Enclosed Trailer