Recommended In-Bed 7-Way Connector For A 2012 Dodge Ram Longhorn 3500  

Yes, you can use the same 5th wheel hitch but you will need a different installation kit for the new truck. For your new 2013 Dodge Ram 3500 long bed you can use Curt installation kit #C16430-204. This installation kit will accept the Husky 5th wheel…

Fifth-wheel base rails and their corresponding mounting brackets like the Curt Installation Kit #C16430-204 for your 2019 Ram 3500 don't actually have a listed weight capacity, as they are made to match the capacity of any 5th wheel hitch that…

In order to install a Curt fifth wheel hitch on a 2015 Ram 3500 you'll need the Curt Custom Fifth Wheel Installation Kit for Dodge Ram part #C16430-204. I don't recommend using any sort of universal kits as they require drilling into the…

I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…