Bearing Kit for Lippert 4,400 lb Trailer Axle

Question

Question:

HI, do you know bearings and seals I need for a Lippert 4400lb axle model # 774025 Travel Traler Ibex 19QBS

asked by: Troy S

0

Expert Reply:

For a Lippert 4,400 lb trailer axle the correct bearing kit is the part # BK2-100 which includes inner bearing # L68149, inner race # L68111, outer bearing # L44649, outer race # L44610, grease seal # 58846, a cotter pin and a tang washer.

expert reply by: Jameson C

0

Answer 1

The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part #BK2-100 or just the Grease Seal part #RG06-050.

view full answer...

Answer 2

The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.

view full answer...

Answer 3

The Lock N Roll Articulating Coupler #336TS502 will come with two 5/8" grade 5 coarse thread mounting bolts and lock nuts. These bolts have a recommended torque spec of 112 lb-ft.

view full answer...

Answer 4

Hey James, The bearing numbers used on your trailer aren't listed by the manufacturer unfortunately so we'll need to either remove and check them for their part numbers (if still legible) or measure the spindle and hub using a digital caliper…

view full answer...

Answer 5

You can check the condition of your hub's races by carefully removing all bearing grease with a rag to expose the actual surface of the races. When they are completely free of grease, etc., inspect them for any signs of scoring (very slight…

view full answer...

Answer 6

We have the individual components of a bearing kit available for a Dexter 4,400 lb trailer axle but since it's a rarer axle capacity we don't have a bearing kit. So for a Timken set you'd want the part #TMK49FR and #TMK56FR and then for a…

view full answer...

Answer 7

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

view full answer...

Answer 8

For a Lippert 4,400 lbs axle you will need the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles item #BK2-100. The kits for the 3,500 lbs axles fit the 4,400 lbs ones too so hope this clears up the confusion. You will need one kit per hub.

view full answer...

Answer 9

In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…

view full answer...

Answer 10

I do have an option for you but we do not offer a replacement shock absorber for the B&W Companion OEM 5th-Wheel Hitch part #BWRVK3300. The option we do have however is a new head, the Replacement Head Assembly for B&W Companion 5th Wheel…

view full answer...

Answer 11

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 12

When repacking your bearings, you do not want to have the whole hub filled with grease. You basically just want to get the inner and outer bearings and their races greased up and moving smoothly. I attached a video of the process that should help you…

view full answer...

Bearing Kit for Lippert 4,400 lb Trailer Axle

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching