Bolt Head Dimensions for the Replacement M6 x 35mm Square Head Bolt for Rhino-Rack Accessories

Question

Question:

Can you give me the dimensions of the head of this bolt? Thank you.

asked by: Scott

0

Expert Reply:

The bolt head dimensions for the Replacement M6 x 35 mm Square Head Bolt for Rhino-Rack Accessories # RR25XB is 20mm vertical and 20mm horizontal.

expert reply by: Scott S

0

Replacement M6 x 35 Square Head Bolt Diagram
(click to enlarge)

Answer 1

The referenced Thule bolt is not the same as the Malone parts but I have what you need. Malone Aero Bars use their own style of T-Bolt Connectors sold in kits. Check out Malone #MPG915 for a 5/8ths inch bolts, or #MPG8287 for a 1-11/16" bolts. I…

view full answer...

Answer 2

The correct T-Channel nuts you need for the HD crossbars on your Pioneer platform rack can be found here: Replacement M8 Channel Nut for Rhino-Rack Accessories - #RR59TB The Rhino-Rack HD crossbars are definitely a different breed of crossbar which…

view full answer...

Answer 3

I'd be more than happy to help out! These aren't Thule products but the Replacement M6 x 35 mm Square Head Bolt for Rhino-Rack Accessories #RR25XB have that course thread you're asking about, and since the bolts will be in the T-Slot and…

view full answer...

Answer 4

It sounds like you just need the track nut/channel nut (whatever you'd prefer to call it), and while they're not sold as singles you can pick up a pack of 4 with the RotopaX Pack Mount Adapter Kit for Rhino-Rack Pioneer Platforms #RR43203.…

view full answer...

Answer 5

The Replacement M8 Channel Nut for Rhino-Rack Accessories #RR59TB is 1-1/4" long, 3/4" wide and 3/8" thick

view full answer...

Answer 6

The Recovery Track Flat Carrier #RR43235 connects to a Pioneer platform rack via T-Track. It comes with everything you need to get that secured. The aero crossbars #RRVA126B-2 have T-slots as well for the Recover Track Flat Carrier to mount! Recovery…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Bolt Head Dimensions for the Replacement M6 x 35mm Square Head Bolt for Rhino-Rack Accessories

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching