Gooseneck Hitch that Fits Gooseneck Hole 49 Inches on Center From Rear of 2005 Ford F-350  

As long as you have the B and W Turnoverball Gooseneck Trailer Hitch with the part #BWGNRK1108, the trailer hitch will fit both the 2006 Ford F-350 short bed and the 2008 Ford F-250 short bed.

The TST TPMS system part #TST-507-RV-6-C would be a great option that has the 6 sensors like you'd need. Basically the caps of your valve stems get replaced with each of the sensors. Or for a flow through setup the part #TST-507-FT-6-C would be a…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Curt #31604 fits all models of the 1999 Dodge Ram 2500 with the exception of the Sport. As long as your truck is not the Sport model you will be able to install this on the front.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The OEM "prep" package just refers to already having 4 puck style mounting points and a gooseneck hitch already installed in your truck, so if you don't already have one then you will want to select the choice for a 2017 Ford F-350…

For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…

The Curt Flat Plate Gooseneck #C65500 is a multi-fit application that can be used on a cab and chassis truck. Typically, the plate would be placed on top of the flat bed over the rear axle. The Universal Rail Kit, part #C61502 can be used to provide…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

I have attached a photo for you that shows what the factory prep package looks like. This package contains a set of five holes in your truck bed for use with 5th wheel and gooseneck accessories. If you did have this package then most likely you would…

According to the picture you have attached, it doesn't look like your 2012 Ford F-350 is equipped with the factory prep package. The odds are that if you cannot physically see the hitch or pucks in the bed, then you do not have the prep package.…