Installing Lock N Roll Articulating Channel Tongue Trailer Coupler on Tear Trailer  

Question:

Expert Reply:

In order to get this setup, you want to start with the Lock N Roll Articulating Trailer Hitch for 2" Receivers # 336VS501. This will fit the 2" receiver on the hitch on your vehicle.

For the trailer side, you will need to remove the current coupler and choose the correct Lock N Roll Articulating Channel Tongue Trailer Coupler based on the tongue of your trailer. We have the following options available:

Lock N Roll Articulating Channel Tongue Trailer Coupler - 2" Channel - Trailer Side # 336TS528

Lock N Roll Articulating Channel Tongue Trailer Coupler - 2-1/2" Channel - Trailer Side # 336TS506

Lock N Roll Articulating Channel Tongue Trailer Coupler - 3" Channel - Trailer Side # 336TS508

Once you choose the correct coupler based on channel size, the installation process is up to you. You have the option to either bolt or weld the coupler onto your trailer tongue.

I have attached some review videos for your reference.

expert reply by: Robin H

0