Can A Standard Propane Hose Be Permanently Installed Under An RV?

Question

Question:

This this rated to be permanently mounted under an RV to run a gas line to a quick connect?

asked by: Matt B

0

Expert Reply:

Rubber hoses like the MB Sturgis Propane Hose # MBS84FR should never be used for any permanent gas installations.

You're going to want to use copper tubing when permanently installing any gas applications.

expert reply by: Bryce D

0

Answer 1

The smallest sleeve of the Camco Gen-Turi Transfer Kit, part #CAM44881, has an inner diameter of 1.23 inches and an outer diameter of 1.34 inches. It's 1-1/2 inches long. This is used to move the Gen-Turi RV Generator Exhaust System, part…

view full answer...

Answer 2

According to my research, the Artis PDS1RV25 water pump is a 12 volt, 3 gallon per minute pump, and we do have the perfect option for a replacement: - Flow Max RV Fresh Water Pump #LC689052 This is also a 12 volt, 3 gallon per minute pump, though it…

view full answer...

Answer 3

What you are referring to is something like the Camco Gen-Turi RV Generator Exhaust System #CAM44461 which directs exhaust up above the roof line of the RV so that it doesn't affect you or any neighbors near you. It also makes the generator a…

view full answer...

Answer 4

The Camco Gen-Turi RV Generator Exhaust System #CAM44461 can use the Camco Suction Cup Mounts for Gen-Turi Exhaust System - Qty 2 #CAM44850 for simple mounting. This system uses slotted bushings for an integrated fit. It sounds like you also want the…

view full answer...

Answer 5

In order to ensure that the exhaust from the Camco Gen-Turi RV Generator Exhaust System #CAM44461 does not enter into your A/C, there is definitely one thing you can do to ensure it doesn't enter your system. For a guaranteed way, I recommend…

view full answer...

Answer 6

Yes, you can use extensions with the Gen-Turi generator exhaust system #CAM44461. We carry the 18 inch extension, #CAM44872, but you could use 2 o them if needed.

view full answer...

Answer 7

I reached out to Camco regarding a weld-on installation of the bushings for the Gen-Turi RV Generator Exhaust System #CAM44461. According to my contact, this is a perfectly acceptable way to install the system. When possible, welding will always…

view full answer...

Answer 8

The Camco Gen-Turi RV Generator Exhaust System part #CAM44461 comes with several different adapters to fit a wide variety of exhaust pipe sizes. It will do an excellent job of reducing the noise output in addition to redirecting the exhaust gasses up…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Can A Standard Propane Hose Be Permanently Installed Under An RV?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching