Replacement Mounting Hardware for Ford Super Duty Westin HDX Nerf Bars with Drop Steps

Question

Question:

I need brackets and hardware for Westin Nerf bars 56-11315. Do you have them?

asked by: Greg

0

Expert Reply:

We do have the replacement mounting hardware for the Westin HDX Nerf Bars with Drop Steps # 56-11315! This kit is found as part # W55QD on our site. This kit is designed for a number of years for the Ford Super Duty pickup.

expert reply by: Jon G

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

No, you would definitely need to upgrade the entire axle, to include the axle beam and spindles, not just all of the other components to get a 5,200 lbs axle. If you could send me a measurement of your Hub-face-to-hub-face length and your…

view full answer...

Answer 3

Hey Phil! Thanks for getting back to me with those measurements! We have a leaf spring that is an exact replacement but I am guessing it's the pricey one you referenced. It is the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4"…

view full answer...

Answer 4

Hello Julio, thanks for reaching out. The appropriate spring for your trailer will depend on the weight capacity of each axle. Ideally the springs will match the axle capacity. Like for example the 4-Leaf Double-Eye Spring #DX45CR is rated for 2,600…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 9

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Replacement Mounting Hardware for Ford Super Duty Westin HDX Nerf Bars with Drop Steps

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching