bing tracking image
Q & A Icon

Replacement Hub and Spindle for 2014 Ranger Trailer

Question:

I have a 2014 ranger trailer and I need to replace the hub and spindle.

0

Expert Reply:

In order to find the correct replacement hub and spindle you will need to know the capacity of your axle along with the bearings you currently have. In order to find the size of the bearings you can look for part numbers on your existing bearings. If these have worn off, you will need to measure the bearings/spindle. See the diagram below showing where to measure.

If you find that you have an inner diameter of 1.063" then you can use the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 # 8-258-5UC1 you looked at. This hub is designed for 2,000 lb axles. If you have a 2,500 lb axle then the # TA88545-2 is the only option. These use # L44649 inner and outer bearings. For a spindle that works with this hub we have the # TRU44FR for 2,000 lb axles with no brake flange and the # TRU27FR for 2,500 lb trailer axles with a brake flange.

Spindle, Hub, Bearing and Seal Information.
Spindle, Hub, Bearing and Seal Information.
(click to enlarge)
expert reply by:
0
Robin H

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>