Replacement Slam Latch For 2019 Keystone Cougar 5th Wheel 315RLS  

On a Global Link slam latch like the Global Link RV Baggage Door Slam Latch #295-000015, the key code will be on the keys themselves or the back side of the slam latch. If you are unable to locate the key code, I would recommend reaching out to…

As long as you didn't peel the sticker off it would be on the inside handle of the door. I attached a picture that shows code G310.

Yes, for just the G365 key to use with your existing Global Link Lock you can use part #295-000144. This is an exact replacement and will work perfectly with your lock.

The Reese Goose Box is a fantastic upgrade for a 5th wheel to gooseneck adapter, so I can certainly understand the desire to upgrade from your sub-par adapter, and while the answer is technically yes, you can use a Goose Box with a short bed truck,…

On the 2009 Chevy Silverado there is no port to plug in a brake controller. Instead GM put a tow package wire bundle under the dash. You would use the harness with the blunt cut wires that comes with the brake controller and splice into the tow…

The lock code could be located on the key itself, on the face of the lock core, or one a sticker attached to the lock (see photos). Once you find this you can then order the correct replacement key assuming you have a Global Link, Fastec (FIC),…

If the landing gear controls on your trailer are now operating in the opposite direction after installing the Replacement Switch #LG-145236, it is indeed a simple case of miswiring with the wires between the switch and motor. Swapping the red and…

The Global Link Locking Slam Latch #295-000078 is designed for doors 1-3/4" thick and the #295-000015 is designed for 1-1/2" thick, so you would need to know how thick your pass thru doors are in order to choose the correct one. With that…

We do offer replacement lids for the Northern Breeze/Ventline AS-13M. You'd want to go with #BV0554-01 for white or #BV0554-03 for smoke.

We do have most of the parts that you referenced and although we don't have instructions we do have some diagrams on each of the product pages that you can check out. Item 7 - #VC0476-00 Item 14 - #BV0115-04 We don't have items 1, 15 and, 16,…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…