What Rhino-Rack Pioneer Platform Fits My Yakima HD Crossbars?  

The Rhino-Rack Sunseeker Awning, part #RR32133, mounts to either the Rhino-Rack Pioneer Platform or the T-slots of other crossbars. Your 2017 Honda CR-V with factory crossbars do not have T-slots, so your only option is to attach a Pioneer Platform.…

Rhino Rack offers versions of their Pioneer Platforms that fit aero bars with the part #RR42114BF for a 48 inch by 38 inch platform or the part #RR42115BF which is 58 by 47 inch.

Yes. You can use the inner channels on the Rhino-Rack Universal Platform Rack #RR42115BF to mount the clamps, but this cannot be done on the #RR42114BF - per my contact at Rhino-Rack.

Thanks for the picture! The Rhino-Rack Universal Pioneer Platform Rack for Crossbars Item #RR42115BF will fit your Garvin Expedition crossbars if they are less than 3-5/8" wide. I have attached a couple of videos that demonstrate how this…

Absolutely! The inner width of the clamps of the Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 58" Long x 47" #RR42115BF are 3 inches wide. I went ahead and attached a diagram for your convenience of the width. If…

The Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 54" Wide #RR95TB that you mentioned requires Rhino-Rack crossbars. You would also need Pioneer Platform Mounting Kit #RR43105. You can provide us with your vehicle's…

I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part #RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

I do have an option to use the Rhino-Rack Universal Pioneer Platform Rack over the top of a Retrax XR Series and Mountain Top EVO-M Tonneau Cover but you'd have to use crossbars. In order to do this you'll need part #RRVA165B-RRRLT600 and the…

I do have an option for you but in order to use crossbars with the Retrax XR Tonneau Cover on a full size truck you'll have to choose a crossbar length greater than 70". The Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600 is one of…

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long #RRVA180B-RRRLT600. This system will be approximately 4-1/4" to the top of the…

I have a solution for you, but the Rhino Rack Pioneer Platform #RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of…