bing tracking image
Q & A Icon

Will Curt Trailer Hitch Receiver # C15409 Fit 2006 Dodge 2500 Mega Cab With OEM Hitch

Question:

I am interested in running this hitch. Will the C15409 fit the 2006 dodge 2500 Mega Cab with the factory hitch? Im wanting to run a setup like the attached picture. Thanks

1

Helpful Expert Reply:

The hitch you have referenced, Curt Class V Trailer Hitch Receiver, part # C15409, is a 2 inch receiver, and can be installed along with an OEM receiver, on your Dodge Ram 3500. The towing capacity for this hitch is 17000 lbs, and it also has a tongue weight capacity of 2550 lbs. No ball mount, clip or pin is included, so I would recommend Draw-Tite Ball Mount, part # 40330. I would also recommend Pin and Clip, part # PC3. For a 2-inch hitch ball, I would recommend part # A-90. It has a towing capacity of 10000lbs.

From the photo you supplied, it appears as if the top receiver is a 2 inch and the bottom receiver is 2-1/2 inch. If you want a 2-1/2 inch, I would recommend the Curt Trailer Hitch Receiver, part # C15809. This has a towing capacity of 20000 lbs and a tongue weight capacity of 2700 lbs. For this receiver I would recommend the Reese Ball mount, Part # RP45322. It has a towing capacity of 18000 lbs. I would also recommend Hitch ball, part # 63840, which has a towing capacity of 20000 lbs.

I do need to note that the OEM hitch and the aftermarket hitch were not designed to be used at the same time.

click to enlarge
helpful expert reply by:
1
Jeffrey L

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>