Kayak Load Assist Options for Malone SeaWing Kayak Carrier

Question

Question:

Hi, can I buy one seawing with stingray combo and one seawing only and use the stingray on both seawings?

asked by: Daniel C

0

Expert Reply:

The Stinger Load Assist # MPG350 actually uses the mounting hardware from the Malone SeaWing Kayak Carrier # MPG107MD to secure to the crossbars so you would have to remove the Stinger with the kayak loaded which isn't something I recommend using.

If you want the Stinger for both sets of the SeaWing then you'll need 2 sets of the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD.

We do have some alternative options so that you're only using 2 sets of the SeaWing without the Stinger. This includes the Yakima ShowBoat 66 # Y04068 which gives you a 44-1/4" roller to assist with loading your kayaks, or the Malone Channel Loader # MAL48FR which can be removed and relocated for loading each kayak.

Attached are review videos for you to check out.

expert reply by: Jon G

0

Answer 1

While the Bunk Kit for Malone Trailers #MPG561 will certainly work for your large kayak, there are better options to carry it with the Malone EcoLight Sport Trailer #MAL53FR. I recommend going with a more traditional kayak carrier for ease of use…

view full answer...

Answer 2

The Malone 2 Tier LowBed MegaSport Trailer - 86" Crossbars - 1,000 lbs #MPG550-LB you mentioned will work perfectly for what you are wanting. For the upper crossbars I recommend two of the Swagman Contour Kayak Carrier w/ Tie-Downs - J-Style -…

view full answer...

Answer 3

Yes, your Native Slayer Propel 10 will fit on the Malone MegaWing Kayak Carrier part #MPG207 which is also compatible with the Malone 2 kayak trailers. This will be much more secure than trying to secure the boats to the trailer directly.

view full answer...

Answer 4

The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I did some research online and was able to confirm that you will be able to mount two of the Malone SeaWing Kayak Carrier with Tie-Downs #MPG107MD onto the factory crossbars on your 2020 Toyota Highlander Limited. When installing the two Malone…

view full answer...

Answer 7

Hello Jason. The Yakima LockNLoad Platform has T-slots which can be used for mounting certain accessories, but it will not work with clamp on accessories like a roof basket or cargo box. If you want to be able to use both a Platform and a roof…

view full answer...

Answer 8

view full answer...

Answer 9

The factory roof rack on your 2015 Subaru Outback will absolutely be able to mount a pair of the Malone kayak carriers you asked about: - Malone SeaWing Kayak Carrier with Tie-Downs #MPG107MD These have universal mounting clamps to fit your…

view full answer...

Answer 10

Round bars can be pretty frustrating to deal with for this reason. Unless the carrier is loaded the Malone MegaWing Fishing Kayak Carrier with Tie-Downs #MPG207 on round bars is going to be able to tilt forward and backwards. This means that when the…

view full answer...

Kayak Load Assist Options for Malone SeaWing Kayak Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching