Curt Brake Controller Wiring Harness for 2018 Ford F-150

Question

Question:

Hello I’m looking for a Curt brake controller wiring adapter #51437. Can’t seem to find it on your site. …To go along with the Curt brake controller C84VV. Thank you!

asked by: Jake

0

Expert Reply:

Curt replaced the 51437 with the # C51436 which fits a 2018 Ford F-150 (among other Ford vehicles) and is compatible with the # C84VV Curt Discovery brake controller.

expert reply by: Mike L

0

Answer 1

To install the Curt TriFlex NEXT Trailer Brake Controller #C24VV to your 2018 Ford F-150 I recommend also picking up the Custom Wiring Adapter #C51436 so the installation is a plug and play setup. You'll be able to find the OEM connector on your…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

Hi Francis; the Curt Custom Fifth Wheel Installation Kit #C57008 can be installed with a bed liner. However, the installation process depends on the type of bed liner. If it is plastic it must be trimmed for metal to metal contact. If it is a…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Thanks for the kind words! Yes, the Custom Fit Tie Down Kit item #TL82FV does include both Front item #TLF2018 and Rear item #TLF3007 tie downs. These fit the 2018 Ford F-150 with a 6-1/2' bed.

view full answer...

Answer 8

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Curt Brake Controller Wiring Harness for 2018 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching