Does the Rhino-Rack Aero Bar Roof Rack for Camper Shells Come With Longer Bars

Question

Question:

Looking at Item # Y02-490B - Do you sell this package with longer crossbars. Say 65 or 72 inch. It would be perfect for the kayak trailer Im building.

asked by: Jeff A

0

Expert Reply:

In order to get the Rhino-Rack Aero Bar Roof Rack for Camper Shells with longer bars you'll need to purchase all the kit components separately but I have listed them for you below.

Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16
Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600
Rhino-Rack Vortex Aero Crossbars part # RRVA165B-2 (65") or part # RRVA180B-2 (71")

Please note, the channels under the crossbars that the feet mount in are only 11.8" long on each end so your track width will play into how long of a bar you can go with.

expert reply by: Conner L

0

Answer 1

The square blocks included with Rhino-Rack track adapter kit #RRT-FK3 are 0.71 inches long, 0.51 inches wide, and 0.12 inches thick.

view full answer...

Answer 2

I reached out to my contact at Rhino Rack and we discussed your application. The weight rating they give is normally based on the capacity of the roof of the vehicle they are going on because the crossbars can handle over 300 lbs. Significant…

view full answer...

Answer 3

I recommend picking up the Aero Style Crossbar T-Slot Fit Kit #MPG8287 which comes with bolts, nuts, and washers that will fit in the Yakima HD Bar T-Slots like the 78" part #Y01159. If you're trying to find specific dimensions for your own…

view full answer...

Answer 4

I have the perfect system to add crossbars to the bed of your 2008 Chevrolet Silverado without drilling. For this, I recommend using the Yakima BedRock HD Towers part #Y01160 with the Yakima HD Crossbars part #Y01159. This is a brand new system from…

view full answer...

Answer 5

I recommend going with the 78" Yakima HD Crossbars #Y01159 for your application. These will be a bit longer than the width of your bed so you you'll have enough room to fit it with your towers. If you already have the towers that fit…

view full answer...

Answer 6

Yes, you can cut to fit the length you need of the 66 inch rivet mount Rhino-Rack tracks, which are the following part number: - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long #RRRTV168

view full answer...

Answer 7

I do have what you need to add a roof rack track system to your bed rails above the tonneau cover but the Rhino-Rack Roof Rack System part #Y02-500B will not work for you because the crossbars are not long enough to span the width of your truck bed…

view full answer...

Answer 8

Yes the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms #RR43196 will fit in the channels of your Frontrunnter Slimline II rack as well as fit the base of a WeBoost antenna.

view full answer...

Answer 9

I have an answer for you. I reached out to my contact at Yakima and they said that they specially make t-slot hardware for accessories that are designed to fit into LockNLoad Platforms like the #Y05044-39. With that being said, there is no way to…

view full answer...

Answer 10

The Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 #RRRTV168 are not designed to be mounted in the rain channels, but rather close to them. You still want rain to move away from your doors and not settle in areas…

view full answer...

Answer 11

I would recommend you use rivets to install the Rhino-Rack RT-Style Roof Rack Tracks #RRRTV168 that come with it as they'll be flush enough that accessories will still slide in the tracks. If you find a flush enough bolt to fit you certainly…

view full answer...

Answer 12

We do have a 71 inch long crossbar version of the RetraxPR XR Rhino Rack Roof Rack with the part #RRVA180B-RRRLT600.

view full answer...

Does the Rhino-Rack Aero Bar Roof Rack for Camper Shells Come With Longer Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching