Wiring Connector For a Lance Slide In Bed Truck Camper To 2022 Ford F-350 Super Duty  

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

The Bargman 5th Wheel/Gooseneck 90-Degree Wiring Harness for Aluminum Truck Bed - 7 Way RV - 7' Long item #54701-007-010 is made specifically for aluminum truck beds to prevent galvanic corrosion. If your 2017 Ford F-250 Super Duty has an…

The Swing Out Extension Brackets for HappiJac Truck Camper Jacks part #LC182496 is the way to go as the 382819 HD are no longer produced. From what I've gathered they were the same width but had a stronger build for heavier campers. They are no…

Yes the Happijac swing out bracket kit part #LC182496 does work with your camper with a set of Happjac truck camper jacks and would also work/be needed for your 2021 Ram truck that is a dually.

The Swing Out Extension brackets part #LC182496 are designed for HappiJac camper jacks and the 2002 Lance 920 does not have the Happijack system unless you have replaced the jacks at one point. If you have replaced the system with the HappiJacks then…

The part 182496 is listed on our site as part #LC182496. It is the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems, and it does in fact come in a set of two. I've linked to a video review of these extension brackets for you.

The Swing Out Extension Brackets #LC182496 are designed for use with the HappiJac Truck Camper Jack Systems #LC736514-4, #LC736514-ELKIT, #LC736515-4, and #LC736515-ELKIT. If you have one of these kits on your 2006 Lance 951, then you can definitely…

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…