Trailer Hitch Fit Suggested for 2016 Toyota Highlander
Question:
Im ready to order, but need to confirm which hitch system is best for our 2016 Toyota Highlander Hybrid. Reviews indicate the Curt products have weaknesses and faults, and a history of breaking. Thats not what we wanna go for. Can you help?
asked by: Kristian M
Expert Reply:
I am not aware of any instance where a trailer hitch properly installed on a Toyota Highlander has been broken or bent. As long as the 5000 lb towing capacity/500 lb tongue weight of the # C13394 or the 6000 lb towing/900 lb tongue weight capacity of the # C13200 hitch isn't exceeded, the hitch will not bend or break.
Of the available options, I'd recommend the Curt # C13394 or the etrailer brand # e98844 that you'd looked at. Both hitches are manufactured in the US, but I'd lean toward the Curt # C13394 because once installed the hitch will be mostly concealed behind the bumper. All that will be visible is the receiver tube and the safety chain hoops. The etrailer brand # e98844 would be fully exposed as shown in the provided photo.
The only fit caveat is if your spare tire is mounted on an aluminum rim, it'll prevent the spare tire from being stored under the vehicle. In this situation, most folks will get a steel rim and have the spare mounted on it so it can remain under the vehicle.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118449, a ball mount like # 2753 and for a trailer ball, use # 19260 for a 1-7/8 or # 63845 for a 2 inch hitch.
I've linked to some install videos that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- CURT
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 7,500 lbs
- Video: Install: etrailer Trailer Hitch Receiver on a 2018 Toyota Highlander
- Shop: BOLT brand vehicle and hitch locks
- Article: My Trailer Hitch Doesn't Fit
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Article: How to Install a Trailer Hitch
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Q&A: Does etrailer Hitch Fit 2019 Toyota Highlander with Steel Spare Mounted
- Video: Detailed Breakdown of the Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: hitch cover
- Shop: Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Search Results: curt 13394
- Shop: Transmission Cooler
- Video: DIY Install: etrailer Trailer Hitch Receiver on your 2019 Toyota Highlander
- Search Results: trailer hitch ball
- Search Results: hitch pins and clips
- Search Results: trim tool
- Shop: Brake Controller
- Video: Best 2018 Toyota Highlander Trailer Hitch Receiver Options
- Video: Mount: Curt Trailer Hitch Receiver on a 2019 Toyota Highlander
- Search Results: 75896
- Search Results: c99fr
- Q&A: Installation of Curt Trailer Hitch on 2018 Lexus RX 350L
- Q&A: What Size Bolts are Needed for Installing Trailer Hitch on a 2015 Toyota Highlander
- Shop: Cabin Air Filter