Can Trailer Hubs Have Different Size Inner and Outer Bearings
Question:
Is is possible that a hub assembly would use two different size bearings? Say the inner is larger than the outer?
asked by: Paul
1
Helpful Expert Reply:
Yes, hubs use different size bearings for the inner and outer bearings pretty frequently. The inner bearing will be the bigger size if there are two different size bearings.
helpful expert reply by: Jameson C
1
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Similar Expert Q&A Pages
- Replacement Hub and Spindle for 2014 Ranger Trailer
- Replacement Hub for 1989 Ranger Trailer
- Solution for 2,200 lb Axle with Short Spindles to Replace Hubs with 5 Lug Bolt Pattern
- Replacement Trailer Hub with L44649 Inner and Outer Bearings and 5 on 4-1/2 Bolt Pattern
- How to Determine Replacement Dexter Hubs for 2,200 Pound Trailer
- Trailer Hub Recommendation that has Inner Bearing L68148 and Outer Bearing L44649
- Solution for Trailer Hub Replacement When Hub Uses Non Standard Bearings
- Replacement Boat Trailer Hub for 1 Inch Diameter Straight Spindles
- Replacement Hubs for TDE 11033 on 2005 Ranger Boat Trailer
- How to Determine the Size of a Trailer Hub Assembly for Replacement
- Replacement Hubs for Small Utility Trailer With L44643 Inner and Outer Wheel Bearings
- How to Remove Bearing Races on a Trailer Hub
- Replacement Trailer Hub for 55-Year-Old Trailer
- Recommended Wheel for a 1976 Rolco Tandem Boat Trailer with ST175/80D-13 Tires
- Need Grease Seals with 1.375-Inch Inner Diameter and 1.980-Inch Outer Diameter for Bearing L44649
- Replacement Hub that Has Bearings L44649 and Bolt Pattern 5 on 4-1/2 inch
- How to Pick Out a Trailer Hub for a Utility Trailer
- Replacement Trailer Hub Ranger Trail
- How To Determine the Correct Replacement Trailer Hub Assembly
- Finding Replacement Hubs for Older Trailer
- Dexter 8-258 Inner Grease Seal Recommendation
- Looking for Replacement Hubs for Boat Trailer with 1.06 Inch Diameter Spindles
- Is it Advisable to Replace Both Boat Trailer Hubs on Venture Single-Axle Boat Trailer
- Grease Cap Recommendation for a Harbor Freight Trailer 90154
- How to Identify Compatible Replacement Idler Hub
- How to Pick Out Replacement Hubs for a Boat Trailer
- Raising a Jayco Tent Trailer for More Ground Clearance and Using Larger Tires and Wheels
- Which Replacement Hubs for 2000 Ranger Boat Trailer
- Do Trailer Hubs have a Speed Rating for Use on a Boat Trailer and Highway