Parts Needed to Install Trailer Brake Controller on 2022 Kia Telluride  

The 2020 and 2021 Kia Telluride trailer wiring setups are the exact same. So yes all of the 2020 Kia Telluride models come with trailer pre-wiring so the #CU94FR that you referenced would fit and work great.

I have a perfect solution for installing a brake controller on your 2022 Kia Telluride! Since you don't have any wiring, we will need to start from scratch, but thankfully there are plug-in 4-Way options and I recommend going with the Curt…

As far as wiring, if you need just brake lights/signal lights alone, you will only need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #CU94FR. The T-Connector includes a powered converter to ensure that your…

If your 2022 Kia Telluride does not have any of the wiring for adding a tow package you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness #C59496 to tie into the tail light wiring for a 4-way flat trailer connector.…

The 2021 Kia Tellurides all come with the factory tow package port that the Curt T-Connector Vehicle Wiring Harness part #CU94FR plugs into. It does not have to come equipped with the factory tow package per se. It's a direct plug-in fit for all…

It looks like you've got everything you need, except for a brake controller. The Curt #C51180 Echo Wireless Brake Controller would be very effective, with your vehicle being already pre-wired, the install would be plug and play. The only knock I…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.