Looking For Dexstar 17-231 Steel Mini Mod Trailer Wheel and ST205/75R15 Radial Tire

Question

Question:

Looking for spare tire for trailer Rim - Dexstar 17-231 15-5JJ 2200lbs black Tire - Ridgway Sport ST ST205/75R15 Thanks

asked by: Kel

0

Expert Reply:

We offer two load ranges in the ST205/75R15 radial tire size you ask about. The Kenda Karrier, # AM10245 is a Load range D radial tire and while # AM10244 is a Load rang C.

Currently we have the Dexstar 17-231 Steel Mini Mod Trailer Wheel that is a 15" x 5" Rim with a 5 on 4-1/2 bolt pattern, in a white powder coat under part number # AM20443 or silver in # AM20436; at this time we do not have in black.

expert reply by: Michael R

0

Answer 1

Hi Charlie; so a 17-231 means it is a Dexstar mini-mod wheel, and 15x5jj means it is a 15" diameter x 5" wide wheel. We have a couple of options for that depending on the color you need, so either of these could be exactly what you're…

view full answer...

Answer 2

It sounds like you are looking for the Dexstar Steel Mini Mod Trailer Wheel part #AM20436 which matches all the specs in the photo you attached. The manufacturers part number for this wheel is also 017-231.

view full answer...

Answer 3

The left side is the driver side, right side is passenger side. On a trailer brake assembly like #23-105 the arm that the magnet is on points to the front of the trailer and the magnet always will be on the bottom. I have included a picture that…

view full answer...

Answer 4

I looked up the trailer you mentioned and was able to find that it uses 12 inch trailer wheels with a 5 on 4-1/2 inch bolt pattern. Based on the width of the tire relative to the rim it looks like a 4.80-12 tire size. The fender clearance looks…

view full answer...

Answer 5

The portion you need to measure is not the cap, but the the hub bore. Remove the grease caps and measure the diameter of the opening the caps occupy. This is the hub bore. You will need an accurate measuring devices like a set of dial calipers that…

view full answer...

Answer 6

I recommend the Phoenix USA QuickTrim Hub Cover for Trailer Wheels item #PXQT545BHS. These black plastic center caps cover 5 on 4 1/2" bolt pattern.

view full answer...

Answer 7

In order to determine which Bearing Buddy you will need from your trailer you'll either need to measure the inner diameter of the hub bore on your trailer, or you'll need to know the bearing numbers in your existing hubs. Once you know the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Looking For Dexstar 17-231 Steel Mini Mod Trailer Wheel and ST205/75R15 Radial Tire

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching