What Replacement Bolt Fits to Attach My Yakima HoldUp Plus 2 Add On # Y02446?  

The Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers #Y8890200 doesn't require the clip as the threaded bolt works to secure the rack. If you really want the pin, you can use the Hitch Pin Clip - 1/2" - Qty 1…

Thanks for the picture of hitch pin, but what was really helpful was actually the set of instructions you have in the background. Based on that you have the first version of the BigHorn which was made around 2001 and the correct hitch pin replacement…

Comparing Yakima Hitch Pins for 1-1/4 inch receivers #Y8880129 and #Y8890176, they looked identical to me, so I contacted Yakima and they are in fact identical parts. They just give different numbers to them for some reason, but the diameter, pitch,…

Replacement Threaded hitch pin #Y8880129 is indeed longer than the original bolt. It is 4.28 inches long overall. Something that you should know though is that when using a hitch adapter like you mentioned it reduces the tongue weight capacity of the…

Yes, Yakima Replacement Hitch Bolt #Y8880129 is the correct item to secure the HoldUp Hitch Bike Rack #Y02445 in your 1-1/4-inch Class II hitch.

The replacement mounting hardware for the 1-1/4 inch versions of the Yakima HoldUp (2008 to present) is actually #Y8880129. Replacement hardware #8890260 is for HoldUp models that fit 2 inch receivers only.

If you wish to convert your Yakima HoldUp Bike Rack for use in a 2-inch hitch you will use the Replacement Tongue #8880580. With this you will need a longer hitch pin, part #Y8890200.

Yes, you can use Replacement Mounting Hardware part #Y8880128 to secure your Hold Up Plus 2 extension #Y02446 to your existing HoldUp platform carrier.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…