bing tracking image
Q & A Icon

Parts Needed For Flat Towing a 2022 Ford Bronco With Ford Modular Front Bumper

Question:

I need to know what products I need to flat tow a 2022 Ford Bronco behind a Newmar 2015 Ventana 3635. I have an Air Force one that I can install on the Bronco, along with a Roadmaster Falcon tow bar. I also have the air kit for the Ventana. I do not have any equipment for the Bronco other than the Air Force 1 unit, that is not installed yet.

0

Expert Reply:

For your 2022 Ford Bronco with the Ford modular bumper you will need Roadmaster Direct-Connect Base Plate Kit # RM92ZR. This will allow you to direct connect your Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 rather than having to use a crossbar.

For the lights you can use either the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-1676-7 or we have the same wiring in the RoadMaster Falcon 2 and Falcon All-Terrain Combo Towing Kit # RM-9243-1 that will also include storage bags and locks to protect and secure the tow bar.

As you already have the Demco Air Force One Supplemental Braking System # SM99243 for the braking system, you will need the Roadmaster Battery Charge Line Kit # RM-156-25. This will ensure you battery in your Bronco is maintained while being towed, since the Air Force One will use some power off your vehicle battery.

Finally once you have the base plate on your Bronco you will need to verify that the receiver on your 2015 Newmar Ventana is within 3" of the height of the base plate. If not you will need an adapter like the Roadmaster High-Low Adapter for Tow Bars # RM-048-4. This particular adapter will raise or lower the tow bars 4" and we have other heights available based on your particular measurement. If you can give me your measurement I can help you find the correct adapter.

expert reply by:
0
Gregory M

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>