Parts Needed to to Use Motor Heads on the HappiaJac 4200 Series

Question

Question:

Just want to sure if this works with Happy Jack 4200?

asked by: Mike S

0

Expert Reply:

The HappiJac 4200 are the manual jacks. We do have the upgrade kits available. The Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems # LC733960 are compatible with the 4200 series if you are replacing motor heads or your camper is already prewired for the electric jacks.

If you camper is not already prewired then you would want the Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 which contains the wiring and other components needed for the conversion.

expert reply by: Scott S

0

Answer 1

There are fuses on your circuit board for your HappiJac system. I recommend locating the circuit board and checking the fuses first. According to Lippert, if the fuses are not the problem you have a bad circuit board and will need to replace it with…

view full answer...

Answer 2

I reached out to my contact at Lippert, and she confirmed that you will be able to use the Clutchless motor head #LC759927 on your 4800 Happijack jack as a replacement for your current clutched motor head LC182515. However, you will need to have the…

view full answer...

Answer 3

We do have the #LC733960-182524 without the wiring kit with jus the #LC733960. This is the motors, circuit board, and remote setup like you are looking for.

view full answer...

Answer 4

Based on the Happijac setup you have the correct electric upgrade kit you'd need is the #LC733960-182524.

view full answer...

Answer 5

The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems Item #LC733960-182524 has everything you need to convert to electric jacks and will not require any special tools to install.

view full answer...

Answer 6

The replacement manual jack for the 4200 and 4160 jacks are the HappiJac Manual Truck Camper Jack System, part #LC736514-4. We have the electric upgrade kit for this part, so we have the upgrade for you. Because your camper is already pre-wired, you…

view full answer...

Answer 7

Yes, the Replacement Motor Heads w Circuit Board and Remote #LC733960 will allow you to replace your 4800 electric motors and will give you a wireless remote to make controlling the jacks easier.

view full answer...

Answer 8

We have just what you're looking for. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems #LC733960-182524 is compatible with your HappiJac 4160 Series jacks and will allow you to convert your system from manual to…

view full answer...

Answer 9

It appears that your current jack motor is going to be obsolete. You will need to replace your jacks with one of the following HappiJac sets if you wish to still use electric motors. The HappiJac Electric Truck Camper Jack System #LC736515-ELKIT is…

view full answer...

Answer 10

The Lippert Components High-Speed Power Stabilizer Jack part #LC298707 is a stabilizer jack and is not designed to lift therefore, does not have a lift capacity. It will be suitable for most camper trailers, travel trailers, 5th wheel trailers, and…

view full answer...

Answer 11

The replacement motor kits that you are seeing will not work with the 4800 series jacks. The 4800 series, uses the 182522 motors and we do not carry them. The 4800 series was discontinued, making it more difficult to find replacement parts. With the…

view full answer...

Answer 12

It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a…

view full answer...

Parts Needed to to Use Motor Heads on the HappiaJac 4200 Series

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching