What Yakima Roof Rack Fits My 2018 Ford F-150 SuperCrew Cab?

Question

Question:

I am looking for a Yakima roof rack with crossbar that can fit with my 2018 Ford F150 super crew.

asked by: Rommel B

0

Expert Reply:

We have just the rack for you! For a great Yakima roof rack that fits your 2018 Ford F-150 SuperCrew cab with a naked roof, I recommend the following:

- Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06122
- Yakima Same-Key Lock Cores # Y07204

This system provides you with an extremely aerodynamic roof rack that gives you a quieter ride and increased fuel efficiency. Also, with the BaseLine towers, the pitch can be adjusted 6 degrees forward and 6 degrees backward to have an absolutely flat setup. With this rack, you receive 165 pounds of maximum weight capacity. As with all roof racks, I recommend confirming with your Ford owner's manual that your roof can handle the amount of weight you wish to transport.

expert reply by: Bob C

0

Answer 1

Yakima has their Jetstream roof rack for your 2018 Ford F-150 Supercrew with the part numbers #Y00426, #Y28TR, and #Y06122 which I attached an install picture of on a truck with a panoramic roof just like yours.

view full answer...

Answer 2

There is not a tonneau cover that is confirmed to fit a Thule Xsporter Rack #TH500XT. The covers all are limited because they need the same mounting location as your Xsporter. There are a few companies that have figured out that they can use the…

view full answer...

Answer 3

Thanks for reaching out, I have the perfect solution for you! To add a rack system to your 2022 Ford F-250 Super Duty and TruXedo tonneau with the TS Rail system I recommend using one of the Yakima ladder racks; the OutPost HD #Y01152-5855 sits…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 9

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 10

Hey Peter, There unfortunately are no type of extensions for the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. There are just spacers for it so the crossbars sit up higher from the Retrax XR…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

Hey Mike, The RetraxPRO MX Hard Tonneau Cover #RT80233 doesn't have a t-slot and the rails would cover the bedrails of the truck so it would not be compatible with a Yakima roof rack. You would need the RetraxPRO XR Hard Tonneau Cover #RTT-80233…

view full answer...

What Yakima Roof Rack Fits My 2018 Ford F-150 SuperCrew Cab?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching