Replacement Parts For Swagman G10 Bike Rack

Question

Question:

Looking for the replacement parts for the Swagman G10 I have an older model. I need the list of the items that can fit the G10 model bike rack. Wish it had that included on the parts description that it could fit the models

asked by: Mauricio

0

Expert Reply:

We have the following replacement parts available for your Swagman G10 bike rack.

Replacement Wheel Strap for Swagman G10 and Quad 2+2 Bike Racks # SP494
Replacement Horizontal Cross Bar Set for Swagman G10 2-Bike Platform Rack # SG1030
Fat Tire Adapter Kit for Swagman G10 and E-Spec Bike Racks # S64679
Replacement Wheel Holder for Swagman G10 Bike Rack - Right Side # G1025
Replacement Wheel Holder for Swagman G10 Bike Rack - Left Side # G1020
Replacement Main Assembly for Swagman G10 2-Bike Platform Rack # SG1001
Replacement Endcap for Swagman Chinook, G10, Quad 2+2, Semi, or Traveler XCS Bike Racks # S1015
Replacement Locking Long and Short Hooks for Swagman Chinook, Dispatch, G10, or E-Spec Bike Racks # SP428
Replacement Wheel Strap for Swagman Chinook, Dispatch, E-Spec, G10, and Quad Bike Racks # S95YR
Replacement Short Hook for Swagman Bike Racks - Qty 1 # S59VR
Replacement 2" Adapter for Swagman 1-1/4" to 2" Bike Racks # SP323
Replacement Receiver Insert for Swagman Bike Racks - Hitch End # P313
Replacement Wheel Strap Block for Swagman Platform Bike Carriers # S1008M

expert reply by: Bud M

0

Answer 1

The correct replacement wheel straps for your Swagman Current #S64678 are the #S95YR. Black is the only option for replacement straps, but they are identical to the yellow straps you have now aside from the color.

view full answer...

Answer 2

The Replacement Clamp Assembly part #8880737 does look like the one you need but it is actually the Replacement Mounting Assembly for SkyRise Rooftop Tents part #8880735 which also comes with the brace that needs to be replaced along with the clamp…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Parts For Swagman G10 Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching