Recommended Spacing for Mounting Blue Ox Heavy-Duty Universal Bolt-On Adapter Tabs  

If the brush guard on your 2009 Ford F-150 has a totally flat front surface that the #BX88266 could mount to and the manufacturer of the brush guard states that can tow the weight of your truck then yes, this could work for you.

The Blue Ox Bolt-On Base Plate Bracket Kit, #BX88230, will require that you drill into your bumper and the bumper will most likely need to be reinforced or modified. I spoke with my technical contact at Bestop regarding the HighRock 4x4 High Access…

The Blue Ox Heavy-Duty Universal Bolt-On Adapter Tabs #BX88266 can be bolted on to a metal bumper by drilling holes and using the hardware provided. However, these are typically used as a last-resort solution in the case that there isn't a…

I do have a solution for you but Roadmaster adapter #RM-035 fits D-ring mounting holes that are 7/8 inch or 1 inch in diameter that have taps that are 3/4 inches thick as opposed to holes that are 3/4 inches in diameter so they would not work. There…

Yes, the Blue Ox Avail tow bar #BX7420 is compatible with universal base plates #BX88266 assuming that you can install the brackets so that they are the proper width apart for the tow bar which is 38 inches or less on center.

I spoke with my contact over at Roadmaster and he said that the minimum safe distance to mount the base plates is going to be 22" apart and the maximum will be 30" apart. Since you're at 26" apart, you're right in the middle of…

Without having the car in front of me if would be hard to give you an accurate measurement, but you can get a good idea if you take a measurement. Go to your 2021 Chevrolet Spark and take some measurements. The baseplate kit comes out of the lower…

The distance between the tabs of the Blue Ox base plate kit part #BLU55XR that you referenced is 20 inches and the height from the ground is 15 inches.

The Blue Ox Avail part #BX7420 is a great tow bar that would work well for you. They make adapters to allow the tow bar to be carried level for situations like yours where the height of the vehicle and RV hitch aren't the same. Most likely you…

All terrain tow bars essentially are ones with telescoping arms and the ability to twist between the shank and the arms which basically allows the tow bar to more easily connect to a set of base plates. Otherwise you have to have the tow vehicle and…

I went out into our warehouse and measured the distance between the two mounting tabs that are on the Roadmaster MX Base Plate kit part #1427-3 and found them to be 2-1/4 inches.

The holes on the brackets that come with the Curt Tow Bar #C19745 are separated by 4 inches on center. The only other tow bar that we currently have to offer that uses the tabs is the Tow Ready Adjustable Tow Bar #63180 but the holes on the brackets…