Does Erickson Truck Bed Ladder Rack Fit 2022 Nissan Frontier With Utili-Track  

I am assuming you are referring to a ladder rack for your 2013 Nissan Frontier, if this is the case then we do have several options that work with the factory Utili-Track System. I recommend using the Erickson Truck Bed Ladder Rack part #EM07705 as…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

You're welcome Chad, and I'm happy to help. Starting off with the ladder rack, you're going to need the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever #TH43002XT-508EX. This mounts to the top of the bed rails so you will be…

Greg, as long as your Adarac Crossbars have t-slots the Smart-Slot Crossbar Adapter Kit #Y04092 will work.

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Hey Brian, sorry about the confusion! So the t-slots of the Pace Edwards Full-Metal JackRabbit #PE36CV are compatible with the "non-commercial" ladder racks as well like the Yakima Overhaul for Tonneau Cover Rails #Y01151-5755. The T-slots…