Complete Towing Setup For A 2022 Toyota Sienna  

The only difference between the Curt Trailer Hitch Receiver #C22UR and our etrailer Trailer Hitch Receiver #e56RR is the powder coat finish. We selected Curt to manufacturer our receivers as they are made in the USA and have a great reputation for…

Yes, there is trimming required for the installation of the etrailer Hitch Receiver #e56RR. The trimming involves part of the underside fascia panel. I went ahead and attached a photo of the trimming area and dimensions.

There are three trailer hitches with a concealed crosstube that fit your 2020 Toyota Sienna that have a concealed crosstube, the Draw-Tite Trailer Hitch Receiver #76112, Curt Trailer Hitch Receiver #C13343 and etrailer.com Trailer Hitch Receiver…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…