Fifth Wheel Rail Kit Recommendation for 2000 Dodge Ram 2500 Long Bed  

Yes, it will! The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #BWRVR3200 includes industry standard 5th wheel rails that are compatible with the Reese 30032 5th wheel hitch. The Reese 30032 uses the same…

The B&W Universal Base Rails Install Kit for 10 Bolt 5th Wheel Hitches is compatible only with 8 foot bed 2002 Ford F-250 Super Duty.

For your 2007 Dodge Ram 2500 with 6-1/2' Bed I highly recommend the B&W Patriot 5th Wheel Trailer Hitch w/ Slider, #BWRVK3270 installed using the B&W Universal Base Rails, #BWRVR3200. The 3/4" thick jaw on the Patriot is precision…

If you're referring to the 5th wheel hitch itself the then yes, you would be able to remove the hitch from the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVR3200 by removing the four pin and clips that…

You will need to use all of the bolts required to install the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVR3200 to use the B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw #BWRVK3270. It is…

The B&W Universal Base Rails and Installation Kit for 10 Bolt 5th Wheel Hitches, part #BWRVR3200 is just the hardware that installs into the bed of your truck, and you'll need to purchase a hitch separately.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…