Trailer Hitch Receiver Fit For 2022 Mazda 3 Hatchback

Question

Question:

Looking for trailer hitch receiver fit for 2022 Mazda 3 hatchback?

asked by: Danny

0

Expert Reply:

There is a trailer hitch receiver fit for your 2022 Mazda 3 hatchback, at the following part number:

- Curt Trailer Hitch Receiver # C98BR

The only other thing I wanted to mention, in case you plan on doing some light towing, is if you need a trailer wiring harness, the correct fit for your '22 Mazda 3 is the T-Connector Vehicle Wiring Harness # C72VR.

expert reply by: Kyle S

0

Answer 1

For the 2022 Mazda 3 hatchback we have the Curt hitch part #C98BR as a confirmed fit. The part #24982 only fits the sedan models.

view full answer...

Answer 2

Hey Paul, yes the Curt hitch part #C44DR that you referenced is a confirmed fit for your 2023 Mazda 3 sedan.

view full answer...

Answer 3

Hey Andrew, so EcoHitch does not like to offer online versions of their instructions, which is pretty annoying, but the hitch definitely does come with a printed set that are easy to follow. The best solution I can offer you right now would be to…

view full answer...

Answer 4

While Curt doesn't have the hitch #C44DR as a fit we were able to confirm this by comparing the fits of the other brand hitches. So we do know that it does fit the 2024 Mazda 3 Sedan.

view full answer...

Answer 5

The highest capacity hitch that we offer for the 2024 Mazda 3 is going to be the Curt Class 1 Hitch #C44DR. This hitch has a 1-1/4" receiver and is rated for 2,000 lbs towing or 200 lbs of tongue weight. The Mazda 3 Sedan really is not designed…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver item #C44DR is confirmed to fit your 2019 Mazda 3 sedan and it does have the capacity to pull your 650 lbs jet ski trailer. I just looked at your Mazda's owners manual and your max towing capacity is the same as…

view full answer...

Answer 7

For your 2020 Mazda 3 Hatchback we have the Curt Hitch #C98BR, which represents the highest rated option available with a 2,000 pound towing weight capacity and a 200 pound tongue weight limit. Based on my research both of these numbers exceed the…

view full answer...

Answer 8

Yes the Curt #C98BR is a fit for your 2019 Mazda 3 hatchback with the rear diffuser. I attached a picture of this hitch installed on a similar Mazda 3 that has the same the rear diffuser.

view full answer...

Answer 9

For your 2020 Mazda 3 Hatchback the Curt Hitch #C98BR is a confirmed fit and will work perfectly. This custom hitch will line right up to existing holes in the vehicle's frame rails for a bolt-on (no-drill) installation and features a 200 pound…

view full answer...

Answer 10

According to my research the Curt Trailer Hitch Receiver #C98BR will fit your 2022 Mazda 3 with the rear diffuser, but you'll likely need to trim it up a little to keep the hitch from pushing up on that diffuser. We haven't had any reports of…

view full answer...

Answer 11

When it comes to using a motorized mobility lift on your 2021 Mazda 3, there are a few things to consider. The first is tongue weight capacity (the vertical load limit). The Curt Hitch #C98BR has a maximum tongue weight capacity of 200 pounds. As…

view full answer...

Answer 12

Trailer hitch installs and trailer wiring installs are totally separate processes. It wouldn't be a situation where "well, you're already half way there may as well do the wiring too." So if you wanted to start with a hitch now like…

view full answer...

Trailer Hitch Receiver Fit For 2022 Mazda 3 Hatchback

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching