Can Locking Pins Be Purchased Separate on Replacement Head for Blue Ox SwayPro WDH  

First you will need to determine if you have the Old Style Head #BXW4011, New Style Head #BLU54XR, Old Style Underslung #BXW4012 or New Style Underslung #BLU34XR for your Blue Ox SwayPro weight distribution. The difference is how the spring bars…

The spring locks for the Blue Ox weight distribution systems are the all the same but the attachment points are different. The only replacement option is the Replacement Spring Lock Kit for Blue Ox 2-Point Weight Distribution Hitch Head item…

The two 3/4”-10 x 4-1/2” Hex Head Bolts in the Replacement Hardware Kit for Blue Ox 2-Point Weight Distribution Hitch #BLU58XR will need a 1-1/8" socket and will need to be torqued to 250-ft.-lbs. Attached is a product overview video for you to…

Blue Ox has an easy system for determining the weight capacity of your spring bars, whereas other companies may use measurements or printed capacity to assist. With Blue Ox, there is a 5 dimple system: No dimples means it is rated for up to 350 lbs…

I spoke with my contact at Blue Ox and was told that the new, non-adjustable head, #BXW4011, will not work with the older SwayPro systems that had the adjustable head. I know this was not the answer you were hoping for but it could actually be the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

To ensure you get the correct kit Dave, you will need to select for your bed length on your 2022 GMC Sierra 2500HD AT4 and if you prefer to have the standard Tie-Downs or the upgraded Talons which have aluminum arms with stainless steel mounts.…

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…