Replacement Double Lip Grease Seal for Kodiak Disc Brake Kit # K2HR35DKG
Question:
Would you please provide me with specifications / part number for dual lip bearing seals for the 10-inch Kodiac disc brake kit eTrailer Item No. K2HR35DKG?
asked by: Tony L
0
Expert Reply:
The replacement grease seal for the Kodiak disc brake kit part # K2HR35DKG that you referenced is the part # 58846.
expert reply by: Jameson C
0
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Replacement Hub for AxleTek Hub # BD2-545-17
- Replacement Brake Drums and Brake Assembly Parts for Lance 1685 Travel Trailer
- How to Determine Trailer Axle Capacity to Find Parts to Add Brakes to Trailer
- Recommended 5 on 4-1/2 Hub for 3,500 lbs Axles w/ L68149 Inner Bearing and L44649 Outer Bearing
- Replacement Bearings/Seals for Haulmark Model TH85X20WT2 Tandem Axle Enclosed Cargo Trailer
- Adding Trailer Brakes to Trailer with 3,500 lb Trailer Axle
- Pre-Greased Trailer Hub & Drum That Fits Lippert 3,500 lb Axle
- Upgrading Trailer with 3,000 lb Axles to Self-Adjusting Brake Assemblies
- Replacement Brake Assemblies for BD2-545-17
- Pre-Greased Hub/Drum for 3500 lb Spindles on 2018 R Pod 178 and Four Winns D0210S02 Trailer
- Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Recommended Hitch for 2011 Nissan Juke for Towing 2,000 Pound Trailer With Brakes
- Parts Needed to Add Electric Brakes to a Trailer
- How To Find Correct Replacement Bearings and Hub for Skeeter FXR20 Boat Trailer
- Picking Out Replacement Hub for 1996 Elite Ski Boat Trailer
- Replacing Lippert 3,500 Pound Axle with 76 Inch Spring Seat Length
- Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Inner Grease Seal Placement On Trailer Electric Brakes
- Determining Which Replacement Parts Fit Lippert 8000lb Axle
- Determining the Correct Replacement Brake Drums and Hubs for 1967 Forester Camper
- Do Trailer Hub Seals Get Damaged When Pulling Hub Off to Inspect Brake Assemblies
- How To Find Correct Replacement Bearings and Hub for Magic Tilt Chaparral
- Best Way to Pack Trailer Bearings with EZ Lube Spindles
- Can EZ-Lube Hub and Drums be Used on Non-EZ-Lube Spindles
- How to Determine What Replacement Hub and Drum Assembly with a 5 on 4-1/2 Bolt Pattern
- Can a Hub/Drum Be Installed on Axle Without Electric Brake Assembly
- How to Select Replacement Hub/Drums for EZ-Loader Trailer
- Will Changing From Idler Hub to Hub/Drum Change Wheel Offset