Pinhole Measurement from Front and Rear of the Draw-Tite # 76268

Question

Question:

Can anyone tell me what the distance is from the center of the pinhole to the front of the receiver, and what the distance is from the center of the pin hole to the rear of the receiver? I cant see to find this information anywhere.

asked by: Ian M

0

Expert Reply:

I definitely have those measurements! I pulled the Draw-Tite Hitch # 76268 from the warehouse and measured it for you. From the front of the hitch receiver tube, the center of the pinhole is 2-3/8". From the rear of the receiver tube, the center of the pinhole is 2-7/8".

I went ahead and attached a diagram for your convenience.

expert reply by: Bob C

0

Pinhole Location on the Draw-Tite Hitch - 2" # 76268
(click to enlarge)

Answer 1

The crossbar of the Curt 13423, which we refer to as part #C95CR is exposed, just like the Draw-Tite #76268 would be. I've linked to a photo showing what the Draw-Tite 76268 hitch looks like once installed, the Curt #C95CR would look almost…

view full answer...

Answer 2

When installing the Draw Tite hitch part #76268 on your 2019 Acura RDX there is no need to remove any rear fascia or panels. It simply gets bolted into place and hangs below the rear bumper. See attached picture to see what it looks like installed.

view full answer...

Answer 3

Correct, the Draw-Tite Max-Frame Trailer Hitch Receiver part #76268 which is a fit for your 2019 Acura RDX does indeed sit below the rear spare tire. Generally speaking, hitch manufactures will position the receiver tube so it does not stick out past…

view full answer...

Answer 4

Yes, we do! To add a hitch to your 2024 Acura RDX, I recommend the etrailer item #e72AR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity…

view full answer...

Answer 5

Currently, a great hitch that will fit your 2022 Acura RDX is the Curt Trailer Hitch Receiver - Custom Fit - 2" #C95CR. Apart from offering you 350 pounds of maximum tongue weight capacity and 3,500 pounds of gross towing weight capacity, it…

view full answer...

Answer 6

I recommend our etrailer Trailer Hitch Receiver #e72AR for your 2024 Acura RDX. This is the same receiver I got for my 2020 RDX and I like how the matte black finish looks against my lower fascia compared to the other receivers which have a gloss…

view full answer...

Answer 7

For your 2019 Acura RDX the hitch that sticks out the least is the etrailer Class III part #e72AR. Other options stick out around an inch more or so.

view full answer...

Answer 8

The Curt Trailer Hitch Receiver #C95CR is the exact same hitch as the Curt 13423 that fits your 2019 Acura RDX - we just create our own unique part numbers since manufacturers can sometimes have crossover with part numbers. The etrailer Trailer Hitch…

view full answer...

Answer 9

Yes, we have exactly what you're looking for with the Draw-Tite Max-Frame Trailer Hitch Receiver #76268. It features the 2 inch square receiver that will work great to carry your bike rack with the same size shank. Please note that this hitch…

view full answer...

Answer 10

I checked with Curt and the hitch part #C95CR that you referenced does fit your 2021 Acura RDX with the technology package.

view full answer...

Answer 11

Thule does not list the Thule Outway part #TH65JV as a fit for your 2020 Acura RDX but we do have other great trunk mounted options like the Yakima Fullback part #Y02634 which is a fully loaded hanging style rack. Or if you wanted the platform style…

view full answer...

Answer 12

I have a solution for you. While the Curt Class 3 Trailer Hitch Receiver for 2" Hitches #C95CR will fit your 2020 Acura RDX, it will be more exposed than your factory hitch you have installed now on your vehicle. Unfortunately, there are no…

view full answer...

Pinhole Measurement from Front and Rear of the Draw-Tite # 76268

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching