Does etrailer Trailer Hitch For 2013 Toyota Highlander Allow Full Size Spare to Stay  

To add a brake controller to your 2010 Highlander you will need a 4-way, 7-way upgrade kit, and the brake controller itself. I recommend the following: -T-One Vehicle Wiring Harness #118449 (If you do not have the factory tow package) -Curt…

I'd go with the Tekonsha #22119 if you think you might go with a different bake controller at some time in the future, but if you're happy with the Curt #C51180 Echo wireless brake controller, you can install a functional 4-pole using part…

I recommend the EcoHitch Hidden Trailer Hitch Receiver #EH35VR for your 2022 Toyota Highlander XSE with AWD. This receiver is made in the USA with an alloy of recycled materials which combines aluminum, steel, and stainless steel. The receiver is…

Both the Curt Trailer Hitch, #13534, and the Draw-Tite Hitch, #75726 for a 2008 Toyota Highlander will install in very much the same way. I have included installation instructions for both hitches below for comparison. I have also included video…

I would be happy to help you. I have a hitch for you but Draw-Tite's parent company is being bought out (3/07/2023) so their inventory is low or nonexistent which explains why you can't find that hitch. Instead you will want the etrailer…

The carrier I recommend is the etrailer, part #e98873, because it's lightweight but still has a 500 pound capacity. This makes it easier to mount into a trailer hitch and also takes up less of the vehicle's available tongue weight as well.…

Other than the fact that the Curt #13534 uses a gloss powder coat finish and the etrailer.com brand #e98858 hitch uses a matte finish powder coat, there's no difference between the two hitches. Curt manufactures the etrailer.com brand hitches for…

The etrailer brand #e98858 Class III hitch is indeed a fit for all models of the 2013 Toyota Highlander. There aren't any fit exclusions. According to the installation instructions which I've linked for you, the passenger and driver's…

For your 2008 Toyota Highlander we have an etrailer hitch that is a confirmed fit that allows you to keep your full size spare with the part #e98858 but the #e98901 that you referenced was designed for a different vehicle so it would not work for…

For your 2009 Toyota Highlander there will be a few modifications to the rear panels at the rear of vehicle. When you install the Curt hitch part #13534 you will need to remove the tow hooks and you would either need to modify the panels under the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Although it is true that the Draw-Tite Hitch #75586 will not fit on a 2010 Toyota Highlander with the 19 inch spare tire, per the instructions, I do have a solution for you. Draw-Tite has another hitch, part #75726, that will fit with a 19 inch spare…