Timbren Rear Suspension Enhancement System For a 2022 Ford F-150 Tremor

Question

Question:

Which kit part number do I need and will it require extra spacers ?

asked by: Corey S

0

Expert Reply:

The Timbren Rear Suspension Enhancement System # TFR1504E is designed for the standard ride height on a 2022 Ford F-150. Since your Tremor has a lift from the factory you will need the Spacer Kit # T68MR to get the desired 1/2" to 1-1/2" gap between the jounce spring and the axle pad.

expert reply by: Bud M

0

Answer 1

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

view full answer...

Answer 2

The Coil SumoSprings #CSS-1094F are designed to add additional support to the front. Since you don't have a front load on your 2022 Toyota Tundra I don't think this will be necessary or make a real difference. As for the Timbren #T45MR, I…

view full answer...

Answer 3

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 4

It will! I verified with Timbren for you that your 2023 Toyota Tundra TRD Pro is 100 percent compatible with the Timbren system, with the correct part being the following: - Timbren Suspension Enhancement System #T45MR This is a nice upgrade for a…

view full answer...

Answer 5

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 6

It sounds like you are trying to connect your Champion generator to the quick disconnect propone outlet on your Airstream that is commonly used to connect propane accessories such as a grill or griddle, is this correct? If so, you will want to use…

view full answer...

Answer 7

To add a set a Timbrens to your 2022 Ford F-150 Tremor you will need the Timbren Rear Suspension Enhancement System item #TFR1504E. This system has a 6,000 lbs capacity and will help support your stock suspension system when towing. Since your Tremor…

view full answer...

Answer 8

The only difference between the JT's Strong Arm Jack Stabilizer Kit #LC191023 and #LC191025 is that #LC191023 is deigned for 5th wheel RV's that have 58" or more between the front landing gear legs, while #LC191025 is designed to be used…

view full answer...

Answer 9

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

view full answer...

Answer 10

Yes, The Timbren Spacer #T68MR will work with The Timbren Suspension Enhancement #TGMRTT35D on your 2016 GMC Sierra 2500 per the manufacturer. The kit already comes with (2) one inch spacers in the package. You can use up to 1 inch more on the…

view full answer...

Answer 11

The Timbren Rear Suspension Enhancement system that you referenced #TGMRCK25D, is intended to replace the factory installed bump stops on your truck. These Timbrens are confirmed as a fit for a 2012 Chevy Silverado Pickup 2500 or 3500 and fit both…

view full answer...

Answer 12

Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1" to…

view full answer...

Timbren Rear Suspension Enhancement System For a 2022 Ford F-150 Tremor

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching