When Installing Titan Master Cylinder # T4395100 Does Cover Plate Face Up or Down
Question:
Which way is up on the cylinder cover? Does the raised rim around the filler plug hole go up, or down into the cylinder reservoir? Thanks!
asked by: Mike
1
Helpful Expert Reply:
My technical contact at Titan confirmed that the silver cover plate needs to have the side with the raised rim facing down into the cylinder. After you insert the fill cap into the cover plate, the fill cap should sit flush on the smooth (non-raised) side.
I have attached a brief video describing the assembly of the cylinder.
expert reply by:
Lori W
1
Product Page this Question was Asked From
Replacement Master Cylinder Assembly for Dexter Model 60 and Aero 7500 Brake Actuators - Drum
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
more information >
Similar Expert Q&A Pages
- Which Replacement Master Cylinder Fits Titan Aero 6000 Disc Brake System
- Replacement Master Cylinder and Shock for Dexter A-60 Actuator
- Dimensions of Replacement Master Cylinder Assembly for Dexter Model 60 and Aero 7500
- Dimensions of Titan Replacement Master Cylinder Assembly T4395100
- Replacement Master Cylinder for Aero 6000 Actuator
- Can 1600 PSI Pressure from Actuator be Used with Drum Brake Assemblies
- Titan Brake Actuator Master Cylinder Replacement Gasket
- Replacement Master Cylinder for a Titan Model 60 Drum Trailer Brake Actuator
- Replacement Master Cylinder for Titan AERO 6000 Actuator
- Master Cylinder Assembly for Titan Model 60 Brake Actuator
- Replacement Master Cylinder for Older Model Titan Model 60 Brake Actuator
- Best Option for Replacing 85841 Master Cylinder on Atwood Drum Brake Actuator
- Replacement Master Cylinder for Titan 60ZX7000 Drum Brake Actuator
- Replacement Master Cylinder for DICO 189
- Ranger Boat Trailer Disc Brake Actuator Availability to Replace an A-60
- Available Replacement Parts for Tie Down Engineering LP7000 Actuator
- Replacement Master Cylinder For Titan Model 60 W/ 23361 Master Cylinder
- Do You Need To Bleed the Dico Replacement Master Cylinder # 23361 Before Installing on the Trailer
- Replacement Master Cylinder for Dico Model 60 Actuator for Drum Brakes
- Does the Replacement Master Cylinder for Titan Aero Actuators Come with Snap Rings, Spring and Seals
- Titan Brake Actuator Replacement for Titan Model 60 60ZX7000
- Converting Trailer Hydraulic Drum Brakes to Disc Brakes with a Titan Model 60 Actuator
- Aero 6000 Master Cylinder Replacement for Use with Disc Brakes
- Replacement Parts for Dico Aero 6000 Disc Brake Actuator on Four Winns Boat Trailer
- Brakes Locking Up On Tandem Boat Trailer With Hydraulic Drum Brakes
- Which Replacement Master Cylinder for Titan Model 60 Brake Actuator
- Replacement Master Cylinder and Push Rod for Titan Model 60 Brake Actuators
- Recommendation for Rebuilding a Trailer Braking System on a Boat Trailer